|Project by rockmolsen||posted 12-28-2015 06:03 PM||721 views||0 times favorited||3 comments|
At a show I did a few months back, a customer asked if I could take the Drunken Cutting Board idea and make a large clip Board. He is a manager of a restaurant and he wanted something large like legal size and wanted the ability to hold papers on the back. This is what materialized. Its 11×17 and 3/8 thick. Made from maple, walnut and the thin bands are Philippine mahogany. I first marked the locations of where I wanted the pins, used a centering jig to drill the holes, then to drill press to drill the 3/4 half recesses. I cut some 3/16 rod, sanded the end round and epoxied them into the holes. Sanded to 220 and finished with 2 coats of wipe on poly.
-- Rick --------The measure of who we are is what we do with what we have.