• Advertise with us
Project by DTWoodknot posted 09-05-2009 04:27 AM 1606 views 2 times favorited 9 comments Add to Favorites Watch
Table No picture No picture No picture No picture No picture
Zoom Pictures

I built this table as a wedding gift for my wifes brother. all from reclaimed lumber.

-- Dave, I wood if I could but I can't so I woodknot

9 comments so far

View haitran's profile


3 posts in 3131 days

#1 posted 09-05-2009 04:40 AM

Great..! Thats a wonderful gift from your clever hands…

View huff's profile


2828 posts in 3214 days

#2 posted 09-05-2009 05:15 AM

Dave, Great looking Table. Really nice use of reclaimed lumber. How did you do the curved skirt?

-- John @

View CaptainSkully's profile


1578 posts in 3487 days

#3 posted 09-05-2009 06:49 AM

That’s a very challenging project. You should be proud. I’ve seen that episode of NYW six times. If you can do that with curved wood, I’d love to see what you do when it’s straight…

-- You can't control the wind, but you can trim your sails

View Art's profile


86 posts in 3132 days

#4 posted 09-05-2009 08:38 AM

Beautiful job…...elegant with clean lines. She should be very happy with it and you can be proud you made it.

-- Arthur T., Pringle Braai Furniture, South Africa, A lion leaves its skin when it dies....

View BeeJay's profile


71 posts in 3116 days

#5 posted 09-06-2009 02:19 PM

Now that is a nice Demi-Lune. Beautifully done, touch of class there. What is the wood etc.

-- If you try to fail and succeed, what have you done?

View kcrandy's profile


285 posts in 3361 days

#6 posted 09-06-2009 04:53 PM

Beautiful lines, very elegant.

-- Caulk and paint are a poor carpenter's best friends

View a1Jim's profile


117027 posts in 3506 days

#7 posted 09-07-2009 03:21 AM

This is a fine table Dave great job

-- wood crafting & classes

View DTWoodknot's profile


150 posts in 3115 days

#8 posted 09-08-2009 03:37 AM

Thanks Guys for all the kind words. I built it out of oak, the curved frount was done with a sub frame of plywood and i back cut the 3/4” oak every 1/4 with a 1/2” deep cut this made the oak flexable enough to make the bend.

-- Dave, I wood if I could but I can't so I woodknot

View Beginningwoodworker's profile


13347 posts in 3602 days

#9 posted 10-08-2009 05:00 AM

Beautiful tables!

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics