|Project by Tugboater78||posted 12-23-2015 03:45 AM||1005 views||6 times favorited||3 comments|
All my sandpaper for my sanders, and my sheets of sandpaper were all shoved into a drawer. After putting up with the hassle for over a year i finally got around to doing something about it. Idea is not original, i found many similar.
Used up scraps of plywood, ( seriously need to find more projects to use them up)
My first successful project using a dado stack, usually use a router for dados, but the base on my goto router is screwed up.
12” deep, 16 3/8” wide, 18” tall ( with small base)
• Top Left – is for my BnD Mouse pads
• Bottom Left – is for 5” ROS pads (if i need a new pad i remove old and drop sander down on dowels and new pad is automatically lined up with dust holes)
• Top Right – is random stuff, belts, some scotchbrite pads, my foam sanding block, small pieces of paper for a smaller foam block ive lost track of.
• Bottom RIght – is for full sheets of paper.
Need a few more “shelves” but ran out of scraps of the correct size.
Plan on making a few similar sized cabinets using the same concept with the dados, as a bank behind my miter saw.
-- "....put that handsaw to work and make it earn its keep. - summerfi" <==< JuStiN >==>=->