|Project by bandit571||posted 12-22-2015 02:44 AM||786 views||0 times favorited||10 comments|
From a slab of Walnut that was resawn down. I also resawed a plank of white Oak and turned a few legs. The Walnut was for the top, and the aprons. White Oak for the 2”x2” x20” legs. 7/16” Poplar dowels. Legs splay out at ~ 12 degrees. Dowels are 7” up from the floor. Long aprons have a curve or two sawn into them.
Finish is a Blended item, called Witch’s Brew. Recipe is in the blog for this table’s build. There is a coat of Poly Gloss on top of the blend. Boss seems to think this will be either a Night Stand, or a plant stand.
Hope you all like this little table. I was just using up a stack of off-cuts, and leftover boards.
-- A Planer? I'M the planer, this is what I use