| Project by Terry | posted 1390 days ago | 882 views | 2 times favorited | 4 comments |  |
 |
This piece is 3 1/2×4. Finish is semi-gloss lacquer. The lid fixes an over large opening and is glued in place. I made the from the spigot after I parted off the hollow.
| Pin It |
4 comments so far
BTKS
home | projects | blog
1916 posts in 1662 days
#1 posted 1390 days ago
Beautiful grain, I like the flowing curve into the sharp bevel of the lid edge. Nice work. BTKS
-- "Man's ingenuity has outrun his intelligence" (Joseph Wood Krutch)
jockmike2
home | projects | blog
10635 posts in 2444 days
#2 posted 1390 days ago
Nice design, very nice turning, too bad you had to glue on the lid. It would have been a wonderful box.
-- (You just have to please the man in the Mirror) Mike from Michigan -
a1Jim
home | projects | blog
89117 posts in 1774 days
#3 posted 1388 days ago
wonderful turning great job
-- W James Brokenbourgh Custom furniture maker http://artisticwoodstudio.com/
Innovator
home | projects | blog
3584 posts in 1611 days
#4 posted 1388 days ago
It came out Great..
Nice wood selection.
-- Whether You Think You Can or You Think You Can't, YOU ARE RIGHT!!!
Have your say...