|Project by Andrew||posted 1575 days ago||791 views||1 time favorited||6 comments|
All Oak, this is the second large project I undertook, I didn’t even have a table saw when I started, just a skil, and a black and decker plunge router. The 4 doors on the bottom were purchased from menard, but everything els was my own design. I has worked out very nicely, also I have learned a lot since making this, someday, it will be replaced and recycled. I don’t remember too much about this project except there is a lot of tongue and groove joinery and internally a lot of wood screws, it also took a long time to build, especially carving the feet with a dremel armed with a sanding drum ( many ) always where eye protection.
-- Even a broken clock is right twice a day, unless, it moves at half speed like ....-As the Saw Turns