• Advertise with us
Project by bob101 posted 12-08-2015 03:17 AM 807 views 0 times favorited 5 comments Add to Favorites Watch

Yet another desktop humidor build, this one is a wormy maple ply with maple veneer on the expose edges, and solid Birdseye maple edge banding with a 3/8 radius round over , finished with a red mahogany stain and six coats of sprayed lacquer with 320 then 600 grit sanding between coats. Spanish cedar interior with adjustable dividers. Will easily hold 50 cigars.

-- rob, ont,canada

5 comments so far

View drewpy's profile


773 posts in 1232 days

#1 posted 12-08-2015 03:44 AM

Nicely done, Rob.

-- Drew -- "The greatest wealth is health".

View Jerry's profile


2517 posts in 1523 days

#2 posted 12-08-2015 04:04 AM

You’re kill in’ me Rob. Yet another masterpiece.

-- There are good ships and there are wood ships, the ships that sail the sea, but the best ships are friendships and may they always be.

View kristian's profile


18 posts in 1141 days

#3 posted 12-08-2015 07:38 AM

Very nice work!!! size?

-- koliko se potrudis, toliko ces imati!

View bob101's profile


321 posts in 3325 days

#4 posted 12-08-2015 01:04 PM

Interior is 11×9 1/2×6 high

-- rob, ont,canada

View Richard's profile


1916 posts in 2565 days

#5 posted 12-08-2015 08:55 PM

Very nice , my problem is getting the lid to close properly around the inner liner so it will seal it properly.

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics