|Project by bandit571||posted 12-04-2015 10:14 PM||1319 views||0 times favorited||20 comments|
A fellow LJer dropped off a few planks of Walnut. I used the Single Brain Cell Sketch Up ( in my head) to design and build a small table out of just the Walnut. Even have 1/2 of a plank left over!
Top is 4/4 by 40”long, and 14” wide. From the top of the top to the floor, it stands at 19-1/4” tall.
Two coats of Poly Gloss, followed by a coat of O’sullivan’s Oil Finish. The shelf needed a couple of “caps” on the ends, as the Sketch-up “Plan” came out a bit too short. Used the cut offs from two of the legs to make the caps. Had to resaw the caps to size.
Took a while. it was a fun project to do….daughter sees this…she MIGHT “Table-nap” it to her house…
Hope you enjoy this little table.
-- A Planer? I'M the planer, this is what I use