LumberJocks

Bread board and bow knife

  • Advertise with us
Project by grenger posted 12-03-2015 05:47 AM 781 views 1 time favorited 7 comments Add to Favorites Watch

Bread board and bow knife

-- Gerry (the beginner), Gatineau, QC, Canada





7 comments so far

View Ken90712's profile (online now)

Ken90712

16956 posts in 2655 days


#1 posted 12-03-2015 11:01 AM

Nice, Made 15 Knifes just a bit ago. Lots of fun.

-- Ken, "Everyday above ground is a good day!"

View 3woodworkers4life's profile

3woodworkers4life

55 posts in 926 days


#2 posted 12-03-2015 12:54 PM

Very nice. b bWhat size blade did you use? Also what types of wood did you use?

View grenger's profile

grenger

197 posts in 2832 days


#3 posted 12-03-2015 01:27 PM



Very nice. b bWhat size blade did you use? Also what types of wood did you use?

- 3woodworkers4life

blades are 10.5 imches. wood is cherry and Padauk

-- Gerry (the beginner), Gatineau, QC, Canada

View bushmaster's profile

bushmaster

1369 posts in 1748 days


#4 posted 12-03-2015 02:55 PM

Nicely done breadboards and knives. You might be interested to check the one I posted a week or so back, The knife slips in the bottom of the bread board and the cutting surface has been modified so I doesn’t get cut up. Nice as the woods used are so nice. Where do you get your blades. I get mine from R and D bandsaw in Toronto. and have ordered the coil stock and cut and drill my own as there holes are not the same blade to blade. Lessens the cost to half. They have 5/8 and 1/2. I have been using the 1/2, makes a slimmer design.

-- Brian - Hazelton, British Columbia

View grenger's profile

grenger

197 posts in 2832 days


#5 posted 12-03-2015 04:09 PM



Nicely done breadboards and knives. You might be interested to check the one I posted a week or so back, The knife slips in the bottom of the bread board and the cutting surface has been modified so I doesn t get cut up. Nice as the woods used are so nice. Where do you get your blades. I get mine from R and D bandsaw in Toronto. and have ordered the coil stock and cut and drill my own as there holes are not the same blade to blade. Lessens the cost to half. They have 5/8 and 1/2. I have been using the 1/2, makes a slimmer design.

- bushmaster

I get the blades from http://www.harvestbakeryequipment.com/

or from

http://www.horizonequipment.com/

60-70$ for 32 blades plus shipment, they are bread slicer blades 10.5 long with holes at each end.

-- Gerry (the beginner), Gatineau, QC, Canada

View majuvla's profile

majuvla

9155 posts in 2333 days


#6 posted 12-04-2015 05:00 AM

Beautiful set. Nice idea for comming X mass holidays.

-- Ivan, Croatia, Wooddicted

View phil7b7's profile

phil7b7

140 posts in 746 days


#7 posted 12-14-2015 03:51 PM

Great looking bow knifes with matching boards, they turned out nicely!

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com