| Project by Gene | posted 1376 days ago | 1000 views | 0 times favorited | 2 comments | ![]() |
![]() |
I made these projects for my neighbours wedding. I scrolled the letters out of the cherry, then laminated the heart onto a maple backround. I made the backround by making a circle with a 1 1/4” radious then I drilled a hole in the center and using a pencil traced around the heat and the birds at the top of the heart. I put a picture of it because that’s the best I can describe it. I used the same circle to cut out the coves on the picture which was spray glued on. Also don’t forget sanding routering, clamping, finishing and last but not least hanging hard ware. That’s what came out and I hope you like it.
-- --Gene Plumley--
| Pin It |




























2 comments so far
Beginningwoodworker
home | projects | blog
13225 posts in 1841 days
#1 posted 1376 days ago
Nice work.
-- CJIII Future cabinetmaker
huff
home | projects | blog
2552 posts in 1453 days
#2 posted 1376 days ago
Sometimes we forget how much work goes into even a “small” project. Turned out great and I’m sure they loved it.
-- John @ http://www.thehuffordfurnituregroup.com
Have your say...