LumberJocks

STILL more cutting boards

  • Advertise with us
Project by Snowbeast posted 12-01-2015 11:05 PM 1392 views 2 times favorited 9 comments Add to Favorites Watch
STILL more cutting boards
STILL more cutting boards No picture No picture No picture No picture No picture
Zoom Pictures

My first attempt at these and if I’d known how easy they can be I would have done them years ago. These are headed to a church bazaar this weekend. I was thinking of pricing these in the $35 – $45 range. Does this sound reasonable from what you can see?

These are all walnut and hard maple, approx. 10” x 14” x 3/4”, with a mineral oil finish.





9 comments so far

View Hawaiilad's profile

Hawaiilad

3103 posts in 2860 days


#1 posted 12-01-2015 11:53 PM

Tony, I think that would be great prices for your cutting boards. At least prices are good for my area.

-- Larry in Hawaii,

View MyHogany's profile

MyHogany

82 posts in 1276 days


#2 posted 12-02-2015 12:07 AM

Nice work, Tony. Your pricing is just right for the size. If and when you do 18” x 22” x 1 1/4” (or 1 3/8”) start at about $85 and up, depending on design and wood selection. Let me know how sales go.

View Betsy's profile

Betsy

3391 posts in 3735 days


#3 posted 12-02-2015 02:26 AM

Those look great. I would push the prices of the drunken road ones to at least $55 for the church. If I was selling them on the show circuit easily could get $65.

-- "Our past judges our present." JFK - 1962; American Heritage Magazine

View majuvla's profile

majuvla

11229 posts in 2706 days


#4 posted 12-02-2015 05:49 AM

The dark one with thin white grid is my favourite.

-- Ivan, Croatia, Wooddicted

View JimRochester's profile

JimRochester

491 posts in 1453 days


#5 posted 12-02-2015 09:50 PM

Nice job. Usually the people at the church bazaars are spend a little less than traditional craft shows. I would still stick with at least $45 though. At a bigger show go with $55 – $65

-- Schooled in the advanced art of sawdust and woodchip manufacturing.

View degoose's profile

degoose

7223 posts in 3193 days


#6 posted 12-02-2015 10:00 PM

Nice work… may try some of these myself…

-- Don't drink and use power tools @ lasercreationsbylarry.com.au

View XquietflyX's profile

XquietflyX

339 posts in 799 days


#7 posted 12-02-2015 10:49 PM

They all look great, i think the price is also good, that would be low where i am…

-- You can tell a lot about your wife by her hands, for example if they are around your throat she's prolly pissed off at you...

View JimInNM's profile

JimInNM

295 posts in 1055 days


#8 posted 12-04-2015 01:44 AM

If that is your first attempt at cutting boards you must have been woodworking for a long time??? Great job, I’m sure thay will sell fast at that price. I’ve been wanting to make some with the drunken design but am afraid to ruin some expensive wood so am waiting till I get more experience….

-- JimInNM........Space Case

View Greg D's profile

Greg D

238 posts in 1790 days


#9 posted 12-07-2015 04:31 PM

Nice work!

-- Greg D, Cen. CA, "Keep it on the Level, Do it Right the First Time!"

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com