|Project by OldGuysRule||posted 11-26-2015 11:15 AM||983 views||3 times favorited||7 comments|
Simple and quick! I had seen this in Wood Magazine years ago, even made one back then. I got rid of everything and I’m rebuilding my tool collection.
Anyway the one that was in Wood had caps on both ends. I didn’t like that because you had to drill such a big hole so I used my half inch plug cutter to plug the end. and the seventh hole is for when you have a blade in your saw you can put the tube that it came from there. That way you don’t need to strain you brain or your eye’s trying to figure out which blade you left in the saw the last time you used it. I use a sharpie to write blade style and TPI on the side.
1/2” PVC and caps
Scraps of 1/2” plywood
1/2” Plug cutter
It really is a quickie to built. And makes blade storage easy.
-- Rod P.........OLD GUY......Learning new things!