LumberJocks

Sidewalk Sign

  • Advertise with us
Project by gsimon posted 11-21-2015 01:08 AM 593 views 4 times favorited 3 comments Add to Favorites Watch

A sidewalk sign for my wife’s pottery studio show next weekend
(2) 8’ lengths of 1×6 x 5/4 deck cedar and cut it into 2.5” strips, ran a dado in the center for sign to insert.
Mortise and tenons for the bottom rails and lap jointed two 3/8” slats for each top rail and glued everything together. This allows the sign to slide in from the top and run through the grooves to the bottom.
Tapered the legs, rubbed on some Danish oil and installed two strap hinges and 21” of jack chain

24” x 32” sign is direct to substrate print on 4mm corex designed by Likewise Social Media and Design
Cheers
Greg

-- Greg Simon





3 comments so far

View observer100's profile

observer100

251 posts in 571 days


#1 posted 11-21-2015 01:21 AM

Very attractive sign. The quality of the work is obvious. Nice job!

View helluvawreck's profile

helluvawreck

23127 posts in 2327 days


#2 posted 11-21-2015 02:24 PM

That’s a great sign and holder and is totally attractive and practical for it’s purpose.

helluvawreck aka Charles
http://woodworkingexpo.wordpress.com

-- If a man does not keep pace with his companions, perhaps it is because he hears a different drummer. Let him step to the music which he hears, however measured or far away. Henry David Thoreau

View WoodNSawdust's profile

WoodNSawdust

1417 posts in 637 days


#3 posted 11-21-2015 06:22 PM

Good luck with the show. Nice looking sign.

-- "I love it when a plan comes together" John "Hannibal" Smith

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com