LumberJocks

Test Tube Vase for the fridge

  • Advertise with us
Project by crowie posted 11-18-2015 09:00 PM 1128 views 4 times favorited 8 comments Add to Favorites Watch

Test Tube Vase for the fridge….

My daughter has a web bases store were she sells her water colour paintings and craft items….

A friend of hers say this sort of vase somewhere and of course dad was recruited to assist….

Recycles Aussie hardwood and orgeon cut to size then a 41/64” through hole for the test tube along with a chamfer for the “o”ring. On the back 2×3/8” raw earth magnets glued in with epoxy. The timber is then gloss clear coated a few times.

While the end result does look impressive and it was very nice to help my daughter, it did turn out to be quite a lot of work to organize and complete the project; BUT that’s what love is about…

-- Lifes good, Enjoy each new day...... Cheers from "On Top DownUnder" Crowie





8 comments so far

View Dutchy's profile

Dutchy

2312 posts in 1861 days


#1 posted 11-18-2015 09:20 PM

I hope they sells good.

-- https://dutchypatterns.com/

View ralbuck's profile

ralbuck

3177 posts in 1959 days


#2 posted 11-18-2015 09:34 PM

NICE & Unique too.

-- SAWDUST is THERAPY without a couch! just rjR

View UncleStumpy's profile

UncleStumpy

730 posts in 2006 days


#3 posted 11-18-2015 10:35 PM

This is a great idea. they should sell like hotcakes.

What is a web bases store?

-- "They don't want it perfect - they want it SPECIAL"

View diggerdelaney's profile

diggerdelaney

405 posts in 3443 days


#4 posted 11-18-2015 11:57 PM

Great Idea Peter. I like the idea of the “o” rings to stop the tubes dropping through

-- Derek, Kent, UK, http://s702.photobucket.com/albums/ww21/diggerdelaney/

View crowie's profile

crowie

1829 posts in 1644 days


#5 posted 11-19-2015 01:24 AM



Great Idea Peter. I like the idea of the “o” rings to stop the tubes dropping through

- diggerdelaney

The test tubes are a fraction over 16mm O.D. so in using a 16mm forstner bit for the hole the test tube has to be encouraged into the hole [breakages] so I got the 41/64” twist drill bit to ream the holes and then the test tube slide through…the “o” ring was the only solution for this old engineer….

-- Lifes good, Enjoy each new day...... Cheers from "On Top DownUnder" Crowie

View Grumpymike's profile

Grumpymike

2096 posts in 2008 days


#6 posted 11-19-2015 08:15 PM

UncleStumpy read that as “web based store. (Us engineer sorts don’t tipe wall. :-)

-- Grumpy old guy, and lookin' good Doin' it. ... Surprise Az.

View crowie's profile

crowie

1829 posts in 1644 days


#7 posted 11-20-2015 06:47 AM



This is a great idea. they should sell like hotcakes.

What is a web bases store?

- UncleStumpy

G’Day Ray,
My daughter sells her wares on the internet www.etsy.com/au/shop/WoodlandandCo
If you have time have a look, even are a dad, I say shes pretty good…
Did 18mths in the USA after finishing her Aussie schooling and part of the time was at Principle College in Connecticut doing art training….

-- Lifes good, Enjoy each new day...... Cheers from "On Top DownUnder" Crowie

View Shuja's profile

Shuja

270 posts in 1259 days


#8 posted 11-20-2015 02:17 PM

Great idea
Helping daughter—- that IS bonus

-- shuja

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com