LumberJocks

Ornament & Stand

  • Advertise with us
Project by TheDane posted 11-17-2015 10:37 PM 981 views 2 times favorited 10 comments Add to Favorites Watch

Just playing around at the lathe … black walnut finial and icicle with a spalted maple globe. The stand is about 9” top to bottom. The little Christmas tree inside the ornament is 1 1/8” tall. Finish is spray lacquer (rattle can).

-- Gerry -- "I don't plan to ever really grow up ... I'm just going to learn how to act in public!"





10 comments so far

View Vince's profile

Vince

1138 posts in 3153 days


#1 posted 11-18-2015 06:41 AM

Very nice…you have been busy, did you bore the hole in the globe or do the inside out process?

-- Vince

View Dutchy's profile

Dutchy

2407 posts in 1892 days


#2 posted 11-18-2015 07:14 AM

This is a very nice one.

-- https://dutchypatterns.com/

View Ken90712's profile

Ken90712

17449 posts in 2912 days


#3 posted 11-18-2015 09:29 AM

Great work.

-- Ken, "Everyday above ground is a good day!"

View Bluepine38's profile

Bluepine38

3370 posts in 2809 days


#4 posted 11-18-2015 03:43 PM

You play very well with wood. Are you going to decorate your tree with these ornaments?

-- As ever, Gus-the 78 yr young apprentice carpenter

View TheDane's profile

TheDane

5256 posts in 3386 days


#5 posted 11-20-2015 01:27 AM

Very nice…you have been busy, did you bore the hole in the globe or do the inside out process?

- Vince

Squared the stock and used a Forstner bit to drill the holes.

You play very well with wood. Are you going to decorate your tree with these ornaments?

- Bluepine38

Nope … these are going to family members as Christmas gifts.

-- Gerry -- "I don't plan to ever really grow up ... I'm just going to learn how to act in public!"

View Howard 's profile

Howard

98 posts in 767 days


#6 posted 11-20-2015 06:55 AM

WOW again… your work is Awesome. Thanks for sharing

-- Life Member of: USA + NRA + USMC = Semper Fi to all three.

View Arlin Eastman's profile

Arlin Eastman

3865 posts in 2285 days


#7 posted 11-20-2015 07:19 AM

Very nicely done buddy!!!

-- Please help me help other Vets click..> http://www.gofundme.com/m1abko.....It is always the right time, to do the right thing.

View helluvawreck's profile

helluvawreck

27268 posts in 2590 days


#8 posted 11-20-2015 03:49 PM

Gerry, this is a beautiful piece. I love it.

helluvawreck aka Charles
http://woodworkingexpo.wordpress.com

-- If a man does not keep pace with his companions, perhaps it is because he hears a different drummer. Let him step to the music which he hears, however measured or far away. Henry David Thoreau

View WoodNSawdust's profile

WoodNSawdust

1417 posts in 900 days


#9 posted 11-20-2015 04:02 PM

Very nice selection of wood and turning.

Did you make the stand? I have been looking for ideas on how to smoothly bend the wire and would appreciate any ideas.

-- "I love it when a plan comes together" John "Hannibal" Smith

View TheDane's profile

TheDane

5256 posts in 3386 days


#10 posted 11-20-2015 04:56 PM

Did you make the stand? I have been looking for ideas on how to smoothly bend the wire and would appreciate any ideas.

Yes. I made a simple jig out of a piece of 1-1/4” dowel and a nail. I bent the small hook where the ornament hangs with a pair of needle nose pliers, hooked that end on the nail, and pulled it around the dowel. Easy-peasy.

-- Gerry -- "I don't plan to ever really grow up ... I'm just going to learn how to act in public!"

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com