LumberJocks

More cutting boards for Christmas

  • Advertise with us
Project by CiscoKid posted 11-13-2015 03:33 PM 1577 views 1 time favorited 11 comments Add to Favorites Watch

Just completed number 6. Cherry, maple, and purpleheart. I made three identical to this board and a couple more out of black walnut and maple. Taking a rest this weekend and starting more next week. What a lot of work!

-- Al, Culpeper VA





11 comments so far

View harum's profile

harum

326 posts in 1877 days


#1 posted 11-13-2015 06:30 PM

Beautiful board! Thanks for sharing. How did you cut the juice groove? On a router table or using a template? Thanks.

-- "If you're not counting the ripples when throwing pebbles in the water, you're wasting your time."

View helluvawreck's profile

helluvawreck

32086 posts in 3100 days


#2 posted 11-13-2015 06:37 PM

This turned out beautifully; it’s very nice.

helluvawreck aka Charles
http://woodworkingexpo.wordpress.com

-- helluvawreck aka Charles, http://woodworkingexpo.wordpress.com

View kiefer's profile

kiefer

5623 posts in 2901 days


#3 posted 11-13-2015 09:05 PM

I agree that is a lot of work and I am not even thinking about making a board like these beauties .
I have a edge grain board with a little design feature under way if it turns out I may even post it .
Keep teasing and inspire us with your boards !

Klaus

-- Kiefer https://www.youtube.com/user/woodkiefer1/videos

View CiscoKid's profile

CiscoKid

344 posts in 3107 days


#4 posted 11-13-2015 10:38 PM


Beautiful board! Thanks for sharing. How did you cut the juice groove? On a router table or using a template? Thanks.

- harum

I adhere 3/4” scrap stock to the perimeter of the board with two-sided tape and carefully use a bearing guided core box bit with a plunge router. Wish I had a CNC machine.

-- Al, Culpeper VA

View JL7's profile

JL7

8692 posts in 3199 days


#5 posted 11-14-2015 12:22 AM

A lot of work but well worth it! Well done.

-- Jeff .... Minnesota, USA

View ScottKaye's profile

ScottKaye

715 posts in 2187 days


#6 posted 11-14-2015 12:49 AM

Hi Neighbor! Beautiful work. I bet some of that wood came from C.P. Johnsons. But where did you get the purple heart? (Im up in Opal.)

-- "Nothing happens until you build it"

View Pointer's profile

Pointer

439 posts in 1345 days


#7 posted 11-14-2015 02:49 AM

This is a nice sturdy cutting board. I’m sure it could double as a butcher block. Whoever gets it will surely enjoy it.

-- Joe - - There is no elevator to success. You must take the stairs.

View ruddy's profile

ruddy

546 posts in 3173 days


#8 posted 11-14-2015 10:18 AM

Now that is a special cutting board. Great design, great contrast and as everyone has said, great work.

-- And my head I'd be a scratchin'

View CiscoKid's profile

CiscoKid

344 posts in 3107 days


#9 posted 11-14-2015 02:03 PM



Hi Neighbor! Beautiful work. I bet some of that wood came from C.P. Johnsons. But where did you get the purple heart? (Im up in Opal.)

- ScottKaye

Yep. I get a great deal of quality wood from Chris at CP Johnson. Need to get in there and see him soon. The purpleheart (and most of my exotics) come from Vienna Hardwood. Getting ready to do a field trip up there soon as well.

-- Al, Culpeper VA

View majuvla's profile

majuvla

13580 posts in 3101 days


#10 posted 11-14-2015 05:44 PM

Perfect pattern and colours. It would be on my wall, not under my knife!

-- Ivan, Croatia, Wooddicted

View smitty22's profile

smitty22

714 posts in 3181 days


#11 posted 11-15-2015 05:35 AM

Beautiful board, one of the best designs I’ve seen, good work on the juice groove too… Those can be tricky!
Your centered finger grooves are a great idea too, allows use of both sides of the board unlike those that are just routed on one face of the board. Kudos!

-- Smitty

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com