LumberJocks
DAILY DEALS Sure-Foot Plus™ 3/4'' Pipe Clamp  |  Makita Makita Recon LCT203W 10.8 Volt Lithium Ion Impact Driver 2 Pc Kit

Stepped and tapered.

Project by degoose posted 114 days ago 976 views 1 time favorited 24 comments Add to Favorites Watch

Just a little knock up I made today to try out an idea.. I bought all that European wild cherry and some of the pieces were tapered so I glued up a few with a strip of PH in between. It was then cross cut and rolled.. same old same old. This is #1 of about 100 to 150 I need to make in the next 7 weeks.
Something for you Eddy. Last pic is without oil.
I am still using the Titebond III.

-- Drink once, cut twice. New website up.... lazylarrywoodworks.com.au


24 comments so far

View hooky's profile

hooky

133 posts in 211 days


posted 114 days ago

as usual very beautiful I dont know how you keep coming up with new ideas (150 boards I think you will be a busy boy)

Did the kangaroo give his nod approval

Hooky

-- Happiness is a way of travel , not a destination (Roy Goodman)

View degoose's profile

degoose

1981 posts in 247 days


posted 114 days ago

Yeah I am off to the Melbourne Working With Wood Show.. Invited by the guys at YAS Engineering… makers of the Torque Work Centres…. I will be at the largest woodworking show in Australia.. Anyone there come and say Gidday.
Hope to take a few.. hundred …. boards and Lazy Larrys.
If I sell all of them you will not hear the end of it.. If I sell none you will not hear from me again,, lol
The Kangaroo is made on the Work Centre by way of a template and overhead pin router set up.

-- Drink once, cut twice. New website up.... lazylarrywoodworks.com.au

View dustbunny's profile

dustbunny

315 posts in 188 days


posted 114 days ago

150 boards !!!!?? I think the easiest solution for this amount of boards is to do a glue up 8’X4’ stack a couple of these sheets and put them on the wee beastie for cut up. That would only take a day or so. LOL

Love the Kanga mascot.

Lisa

-- I inherited the woodworking gene and it's gone into overdrive.......

View degoose's profile

degoose

1981 posts in 247 days


posted 114 days ago

Cool hey

-- Drink once, cut twice. New website up.... lazylarrywoodworks.com.au

View Beginningwoodworker's profile

Beginningwoodworker

4123 posts in 566 days


posted 114 days ago

Nice lumber!

-- CJIII Future cabinetmaker

View ellen35's profile

ellen35

531 posts in 325 days


posted 114 days ago

Larry,
You are one of the most creative guys I know! Your designs are just so impressive!
I love the way you take something simple and re-design it to look great!
That wee beastie will only make your projects more impressive…but 150 boards, yikes!!!!
Ellen

-- Ellen on Cape Cod

View Walnut_Weasel's profile

Walnut_Weasel

246 posts in 115 days


posted 114 days ago

I have to agree with everyone else. Very nice!

-- James - What's your excuse this time??

View patron's profile

patron

2376 posts in 234 days


posted 114 days ago

you must have a swamp nearby ,
this is like shooting
boards ,
in a
barrel !

-- david ,new mexico ,allheart

View Karson's profile

Karson

25797 posts in 1293 days


posted 114 days ago

Larry a unique design. But if the Lord gives you lemons make lemonade.

-- What happens in the workshop stays in the workshop. No wait that doesn't sound right. Karson Southern Delaware karson_morrison@bigfoot.com †

View eddy's profile

eddy

281 posts in 257 days


posted 114 days ago

tanks for the pics i am making as many boards as i can now mostly simply 1’s due to time
restraints doing 1 to 3 craftfairs/farmers market shows a week thes days will try this after my
i get my next bunch of wood

View blackcherry's profile

blackcherry

730 posts in 716 days


posted 114 days ago

Nice work on the design, have a great time at the show and you’ll have no problem selling all your boards.

View jockmike2's profile

jockmike2

7299 posts in 1139 days


posted 114 days ago

Amazing design, you do come up with some great work over and over again, doesn’t your mind ever rest? It’s like a 3D effect.

-- Mike. mwurm13@yahoo.com

View Kent Shepherd's profile

Kent Shepherd

805 posts in 179 days


posted 114 days ago

Never a dull moment with you

Thanks

-- Kent Shepherd * The goal is-----More Tools!

View woodsmithshop's profile

woodsmithshop

288 posts in 438 days


posted 114 days ago

outstanding work, as usual for you Larry, you mentioned having a job, what do you do for a living, if you don’t mind my asking, and how do you find the time to do all of these cutting boards, if you have a job?

-- Smitty!!!

View scrappy's profile (online now)

scrappy

1593 posts in 323 days


posted 114 days ago

Outstanding work! Your boards allways amaze me. You come up with some of the fuzziest designs I have seen. (they make my eyes lok fuzzy with those wavy lines) haha

Great build! Don’t you ever sleep?

Keep pumping them out!

Scrappy

-- Scrap Wood's the best...the projects are smaller, and so is the mess!

View a1Jim's profile

a1Jim

16684 posts in 470 days


posted 114 days ago

Hey Larry
This is a wonderful board your designs are always beautiful and unique congrats on another outstanding creation.

-- Jim from Heirloom Woodshop Southern Oregon

View bowyer's profile

bowyer

342 posts in 289 days


posted 113 days ago

WOW !!!!!!!!!! hehehe

RICK

-- If at first you don't succeed...Don't try skydiving

View Woodwrecker's profile

Woodwrecker

489 posts in 468 days


posted 113 days ago

Larry,
You are “The Baron of Boards” !!!!!
Go get’em pal !!!

-- Eric

View Lee A. Jesberger's profile

Lee A. Jesberger

3710 posts in 872 days


posted 112 days ago

Hi Larry;

Nice board. I swear you must have used drugs at some point to come up with these design ideas. LOL

Maybe you need to tell us which drugs, for inspirational purposes only!

I’ll be watching this for sure.

Lee

-- by Lee A. Jesberger http://www.prowoodworkingtips.com http://www.ezee-feed.com

View Innovator's profile

Innovator

3125 posts in 306 days


posted 112 days ago

Larry your work is beautiful as usual. You have some great looking pieces here.

-- Whether You Think You Can or You Think You Can't, YOU ARE RIGHT!!!

View Andy's profile

Andy

570 posts in 801 days


posted 111 days ago

Fantastic design,lots of sweat,several hours,and good skills = this beauty.
I love this piece!

-- " If I can make it,so can you" Andy in Oregon

View mtkate's profile

mtkate

659 posts in 218 days


posted 111 days ago

Wow, just saw this as I am catching up… I am definitely going to try to copy. Amazing how the oil just makes the design pop.

View Dusty56's profile

Dusty56

3458 posts in 581 days


posted 109 days ago

FANTASTIC DESIGN !!! Just enough PH to add a sweet accent to the board : )
Does the European Cherry darken with exposure to sunlight as does the American Black Cherry ?

-- You know you're getting old when you know the difference between you're (you are) and your (belonging to you) AND how to use them in a sentence .

View stefang's profile

stefang

1644 posts in 227 days


posted 90 days ago

Another beautiful board. I found the comment above about drugs interesting and I’m wondering if the cutting board association has been around testing you for board enhancing steroids.

Hope you enjoyed demonstrating at the show (assuming you have been there already).

-- Mike, American in Norway

You must be signed in to post the comments.

  • View all advertisers
  • Advertise with us

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase