|Project by fixthisbuildthat||posted 11-08-2015 10:04 PM||3276 views||42 times favorited||10 comments|
Hey, guys! Here is my latest shop build, a Mobile Miter Saw Station. I took a lot of cues from other designs and then made several of my own modifications. The stand is 39” tall and has a 93-1/4” wing span. That gives just under 4’ of support on each side of the blade and allows me to do end cuts on 8’ boards with full support.
The whole thing is made from baltic birch and I added a Kreg Trak system with swing stop and stop blocks. These are awesome for those repetitive cuts. I also added a vacuum along with an iVac automated vacuum switch. This turns on the dust collection when the blade is spinning and then turns it off a few seconds after the cut is done. It doesn’t catch 100% of the dust, but is a big upgrade over the bag.
Both the saw and fence are completely adjustable and removable as I mounted them to the based and side wings with INCRA threaded knobs.
Let me know what you think!
-- http://FixThisBuildThat.com - Projects, Plans, and Tools