LumberJocks

Making Tenon Wedges Safely on the Bandsaw

  • Advertise with us
Project by Marcello Bianchi posted 11-04-2015 11:54 AM 1101 views 4 times favorited 4 comments Add to Favorites Watch

Making Tenon Wedges on your Band saw.

You need first to make your wedge stick mine has 2 sizes of wedges cut a wedge shape on the side of your wedge stickto exactly the size of your finished wedge,then cut your blank to the same size see pic 6.(sorry its in the wrong sequence)
set the band saw to width on wedge stick and put the blank in the cut out,cut first wedge then turn blank over and repeat until you have enough wedges.

Hope you like this video please subscribe to my Youtube channel for more top tips and machine tune-up/improvement

Please check out the video of the full process.

-- marcello,UK,http//youtube.com/user/mrcheltune





4 comments so far

View Ocelot's profile

Ocelot

1471 posts in 2105 days


#1 posted 11-04-2015 03:58 PM

Nice way to do it. A custom taper jig for wedges.

View XquietflyX's profile

XquietflyX

289 posts in 427 days


#2 posted 11-04-2015 04:17 PM

very cool!
thanks for sharing

-- You can tell a lot about your wife by her hands, for example if they are around your throat she's prolly pissed off at you...

View Marcello Bianchi's profile

Marcello Bianchi

48 posts in 403 days


#3 posted 11-04-2015 04:59 PM

Thanks for looking

-- marcello,UK,http//youtube.com/user/mrcheltune

View NormG's profile

NormG

5507 posts in 2470 days


#4 posted 11-07-2015 05:50 AM

Great looking jig, thank you for sharing

-- Norman - I never never make a mistake, I just change the design.

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com