|Project by Greg Wurst||posted 07-27-2009 04:44 AM||14889 views||13 times favorited||6 comments|
Shamelessly copied from here:
I needed a place to store sheet goods that was out of the way yet easily accessible and this fit the bill. It’s made from a couple 2×8’s, a 4×8 sheet of 1/2” plywood, a couple 2×4’s, a 3” heavy-duty fixed caster from Harbor Freight, and 3 strap hinges. Total cost less than $30.
I had to drill new holes for the caster to lower it’s footprint to fit under some wall sockets; but otherwise very straightforward. Cut the plywood on the diagonal (I made the rear piece larger than the front). Screw an 8’ 2×8 to a 4’ 2×8 and attach the plywood to the sides. Mount the wheel on the front and attach a suitable support to your wall if needed. Prop it up level, attach the hinges, and you’re done.
-- You're a unique and special person, just like everyone else.