LumberJocks

Dog Feeding Station

  • Advertise with us
Project by Lewis Woodworking posted 11-02-2015 10:16 PM 964 views 3 times favorited 4 comments Add to Favorites Watch

Made a dog feeding Station. Bottom drawer is the Bowls and top drawer holds the food.

-- A Bad Day Woodworking Is Better Than a Good Day Working.





4 comments so far

View Dutchy's profile

Dutchy

2019 posts in 1633 days


#1 posted 11-02-2015 10:43 PM

You have a lot of dogs I suppose. :)

-- My englisch is bad but how is your dutch?

View Rick  Dennington's profile

Rick Dennington

5179 posts in 2659 days


#2 posted 11-03-2015 12:07 AM

Not a lot of information on the build. People on here like more details in a project, like type of wood used, diminisions, finish, etc. I don’t have dogs, so I don’t know much about dog feeders…..

-- At my age, an "all--nighter" is not having to get up and pee...!!!

View Lewis Woodworking's profile

Lewis Woodworking

13 posts in 401 days


#3 posted 11-03-2015 03:57 PM

This is in response to Rick Dennington who wanted more “details”

I found this online and the original post is located here with a full sketch up of the plans, (however I did make some changes to the plan to suit my needs, such as not doing a lift top for the food access I want to be able to set a lamp on top and other “wife knick knacks” that I do not want to move every time I need to feed the dog. Also, I changed the side panel dimensions because the way the plan on the link has it set up you do not have enough room for a 14” inch drawer slide.

Here is the link for the original plans: http://www.thedesignconfidential.com/2012/09/free-diy-furniture-plans-build-pet-organization-dresser

Supplies:

One full sheet of ¾” plywood
One quarter sheet of ¾” plywood
2 – 2×2 at 6’
1 – 1×4 at 6’
1-1/4” pocket hole screws
1-1/4” brad nails
Edge banding for the edges of the plywood, optional
One set of 14” Drawer Slides
3 – Drawer Pulls
Wood filler
Sandpaper
Wood glue
Finishing Supplies

Cut List:

4 – 2×2 at 29-1/4” – Legs
2 – ¾” plywood at 12” x 26-1/2” – Side Panels
1 – ¾” plywood at 19-1/2” a 26-1/2” – Back
1 – ¾” plywood at 13-1/4” a 21” – Bottom
1 – ¾” plywood at 12-1/2” x 21” – Shelf
1 – ¾”plywood at 18-3/4” x 19-1/2” – Front
1 – ¾” plywood at 1-1/2” x 23-1/2” – Top
1 – ¾” plywood at 12-7/8” x 23-1/2” – Top
2 – 1×4 at 14” – Side Trim
1 – 1×4 at 24” – Front Trim
2 – ¾”plywood at 6-1/2” x 12-1/2” – Drawer Box
2 – ¾” plywood at 6-1/2” x 18-1/2” – Drawer Box
1 – ¾” plywood at 12-1/2” x 17” – Drawer Box
3 – ¾” plywood at 7-3/8” x 20-1/2” – Drawer Fronts

-- A Bad Day Woodworking Is Better Than a Good Day Working.

View Rick  Dennington's profile

Rick Dennington

5179 posts in 2659 days


#4 posted 11-03-2015 05:38 PM

wwk,

Very good information on your project…It’s always good to add details on how you built something…A lot of guys (and gals) on here “favorite” a project if they like them, or want to build one like it….Details are important…Thanks for posting your project…..I know your dogs will be happy…!!

-- At my age, an "all--nighter" is not having to get up and pee...!!!

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com