LumberJocks

oak desk

  • Advertise with us
Project by rentman posted 07-13-2007 04:18 PM 1461 views 3 times favorited 8 comments Add to Favorites Watch

this was the 2nd thing I ever made,I built this about 7 years ago.The only tools I had was a bench top table saw,jig saw,hand drill,hand held router and a belt sander.I this simi rough lumber I jointed all the wood with a router plywood and a patern bit.I told myself If I could do this I would invest in tools.

-- Phil, Chattanooga,TN





8 comments so far

View Lee A. Jesberger's profile

Lee A. Jesberger

6686 posts in 2703 days


#1 posted 07-13-2007 04:27 PM

Hi Phil,

Nice job! I’m guessing you have a lot of tools now.

Where’s all the junk, that I normally see on desks?

Lee

-- by Lee A. Jesberger http://www.prowoodworkingtips.com http://www.ezee-feed.com

View oscorner's profile

oscorner

4564 posts in 3035 days


#2 posted 07-14-2007 02:04 AM

That’s one beautiful finish you put on your desk! Even with limited tools you were very talented and made a great desk. Thanks for sharing.

-- Jesus is Lord!

View Dano's profile

Dano

222 posts in 2756 days


#3 posted 07-14-2007 04:21 AM

I agree with Lee, bet you have a whole bunch of tools now! I am very impressed.

-- Dan in Central Oklahoma, Able to turn good wood into saw dust in the blink of an eye!

View woodspar's profile

woodspar

710 posts in 2823 days


#4 posted 07-14-2007 06:27 AM

Isn’t it great to be able to make something with a limited amount of tools?

-- John

View cajunpen's profile

cajunpen

14416 posts in 2790 days


#5 posted 07-14-2007 06:40 AM

Looks great Phil – I really like the finish and simple lines of the piece – Well Done!

-- Bill - "Suit yourself and let the rest be pleased." http://www.cajunpen.com/

View Russel's profile

Russel

2199 posts in 2663 days


#6 posted 08-15-2007 12:34 AM

Great desk. It’s impressive what can be done with a limited tool set and a good supply of ingenuity. I started with a similar collection of low budget tools and I really appreciate what I have now.

-- Working at Woodworking http://www.VillageLaneFurniture.com

View Sawdust2's profile

Sawdust2

1467 posts in 2812 days


#7 posted 09-23-2007 12:42 AM

The raised paneled ends are a nice touch.

Did you by any change dovetail the drawers?

-- No piece is cut too short. It was meant for a smaller project.

View Beginningwoodworker's profile

Beginningwoodworker

13347 posts in 2397 days


#8 posted 10-06-2008 01:37 AM

Thats a nice oak desk, Phil.

-- CJIII Future cabinetmaker

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase