Walnut Side Table with Glass Insert

  • Advertise with us
Project by jstefan posted 10-30-2015 01:08 AM 758 views 1 time favorited 10 comments Add to Favorites Watch

I had a lot of walnut laying around and decided to make this side table for my living room. I finished it with 3 coats of Tung Oil and sanded between each coat.

-- Instagram : StayReadyGearUSA

10 comments so far

View Betsy's profile


3338 posts in 3361 days

#1 posted 10-30-2015 02:55 AM

Looks nice. How did you secure the glass top?

-- "Our past judges our present." JFK - 1962; American Heritage Magazine

View BurlyBob's profile


3688 posts in 1730 days

#2 posted 10-30-2015 03:54 AM

That really nice. You just can’t go wrong with Walnut.

View Woodwrecker's profile


3927 posts in 3041 days

#3 posted 10-30-2015 04:18 AM

I wish I could say I have a lot of walnut laying around…lol
Your table came out great !

-- Eric, central Florida

View jstefan's profile


60 posts in 1025 days

#4 posted 10-30-2015 04:40 AM

I just made a rabbet all around the edge and set it in. I can lift it at any time from the bottom.

-- Instagram : StayReadyGearUSA

View kdc68's profile


2526 posts in 1742 days

#5 posted 10-30-2015 08:50 AM

Good looking table. Well done !

-- Measure "at least" twice and cut once

View CincyRW's profile


156 posts in 1115 days

#6 posted 10-30-2015 12:39 PM

Its beautiful. I’ve never worked much with tung oil before. What made you decide to use this type of finish?

View helluvawreck's profile


23176 posts in 2332 days

#7 posted 10-30-2015 02:07 PM

This table turned out beautifully.

helluvawreck aka Charles

-- If a man does not keep pace with his companions, perhaps it is because he hears a different drummer. Let him step to the music which he hears, however measured or far away. Henry David Thoreau

View robscastle's profile


3392 posts in 1669 days

#8 posted 10-31-2015 10:07 AM

I would be interested in what the costings were for the project.

-- Regards Robert

View jstefan's profile


60 posts in 1025 days

#9 posted 10-31-2015 12:34 PM

I had the Tung Oil open and had used it for another small project and liked how it turned out, so figured I use it for this as well.

-- Instagram : StayReadyGearUSA

View jstefan's profile


60 posts in 1025 days

#10 posted 10-31-2015 12:35 PM

The glass cost about $25-$30 and the walnut was about $6.50 BF, not sure how much I used. I’d guess it cost less then $75 total including finish, glass and lumber.

-- Instagram : StayReadyGearUSA

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics