LumberJocks

How to drill holes in a glass bottle

  • Advertise with us
Project by Jack Houweling posted 10-26-2015 02:02 AM 2729 views 4 times favorited 11 comments Add to Favorites Watch

Drilling in glass is a new one for me so I will show you what I did.

I used a Starrett diamond hole saw in my drill press, and built a very
simple jig to drill the holes. Two holes were drilled and I found the whole
procedure simple to do.

Check out the step by step video on how I did it.

https://www.youtube.com/watch?v=AJLQr-uxsoQ

-- Jack, Delta B.C. http://www.jax-design.net





11 comments so far

View Druid's profile

Druid

1560 posts in 2516 days


#1 posted 10-26-2015 04:36 AM

Nice and simple jig, but it looks effective and adaptable to almost any style of bottle.
The only negative is that you lose your deposit on the coke bottle, but it’s worth it.
Well done.

-- John, British Columbia, Canada

View Jack Houweling's profile

Jack Houweling

107 posts in 924 days


#2 posted 10-26-2015 05:03 AM



Nice and simple jig, but it looks effective and adaptable to almost any style of bottle.
The only negative is that you lose your deposit on the coke bottle, but it s worth it.
Well done.

- Druid


Thanks John, the jig was very simple to make and could be made to fit any size bottle.

-- Jack, Delta B.C. http://www.jax-design.net

View mahdee's profile

mahdee

3761 posts in 1488 days


#3 posted 10-26-2015 10:38 AM

Cool. I wonder if it works on regular 1/4” glass.

-- earthartandfoods.com

View MarkTheFiddler's profile

MarkTheFiddler

2062 posts in 1909 days


#4 posted 10-26-2015 09:09 PM

I like it. Thanks for the tip and the Drill bit type.

-- Thanks for all the lessons!

View ClaudeF's profile

ClaudeF

439 posts in 1428 days


#5 posted 10-26-2015 10:59 PM

View oltexasboy1's profile

oltexasboy1

247 posts in 1425 days


#6 posted 10-26-2015 11:38 PM

Ok I’ll bite ,why drill a hole in a bottle? BTW ,I was watching some of you u-tube stuff. good job.

-- "The pursuit of perfection often yields excellence"

View Mean_Dean's profile

Mean_Dean

5545 posts in 2868 days


#7 posted 10-27-2015 12:00 AM

Pretty cool—thanks for the info!

-- Dean -- "Don't give up the ship -- fight her 'till she sinks!" Capt James Lawrence USN

View Jack Houweling's profile

Jack Houweling

107 posts in 924 days


#8 posted 10-27-2015 03:12 AM



Cool. I wonder if it works on regular 1/4” glass.

- mahdee

That is a good suggestion, I will try it.

-- Jack, Delta B.C. http://www.jax-design.net

View Jack Houweling's profile

Jack Houweling

107 posts in 924 days


#9 posted 10-27-2015 03:13 AM



Ok I ll bite ,why drill a hole in a bottle? BTW ,I was watching some of you u-tube stuff. good job.

- oltexasboy1

I show what I make in my next video.

-- Jack, Delta B.C. http://www.jax-design.net

View TheFridge's profile

TheFridge

7480 posts in 1207 days


#10 posted 10-27-2015 03:23 AM

Pretty sure you can drill any non tempered glass.

-- Shooting down the walls of heartache. Bang bang. I am. The warrior.

View Woods_F's profile

Woods_F

102 posts in 2221 days


#11 posted 10-28-2015 06:34 AM

:):):)

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com