Fantastic canary wood vase..NOT TURNED...ringmasgter done

  • Advertise with us
Project by peterford posted 10-25-2015 01:05 PM 1474 views 1 time favorited 18 comments Add to Favorites Watch

This canary wood vase was made from rings cut at different angles, glued and finished by hand..note the pattern created by flipping every other ring!! The picture of two vases represents the uniqueness of this process..since I am cutting rings I STILL have the solid inside of each ring to make a small version of the larger the photo the small vase on the left came from the inside of the larger vase on the right!! so little if any waste…this canary had exceptional color..very difficult wood to find….............comments always appreciated..thanks for looking!

18 comments so far

View Mike's profile


6 posts in 508 days

#1 posted 10-25-2015 01:07 PM

Wow those are gorgeous. Nice work.

-- Mike, Rhode Island

View bushmaster's profile


1255 posts in 1705 days

#2 posted 10-25-2015 01:11 PM

very nice. I like the colour and patterns.

-- Brian - Hazelton, British Columbia

View majuvla's profile


8738 posts in 2290 days

#3 posted 10-25-2015 01:26 PM

The wase is awesome, but those grains are realy incredible!

-- Ivan, Croatia, Wooddicted

View  woodshaver (Tony)  's profile

woodshaver (Tony)

3939 posts in 2776 days

#4 posted 10-25-2015 01:47 PM

Noting less than stunning! Beautiful work!

-- Tony C UAW, St Augustine FL, My high school shop teacher said "You can do it"... Now I can't stop!

View recycle1943's profile


1117 posts in 1045 days

#5 posted 10-25-2015 02:30 PM

Stunning – RingMaster + imagination = Fabulous Results

Beautiful vase

-- Dick, Malvern Ohio - Your imagination is your only holdup

View leafherder's profile


856 posts in 1375 days

#6 posted 10-25-2015 02:50 PM

Beautiful patterns.

-- Leafherder

View WeekendWoodworking's profile


45 posts in 2022 days

#7 posted 10-25-2015 02:55 PM

Excellent! Beautiful! I have a RingMaster also, and still learning. My goal is work like this! Thanks for sharing! Steve

-- Steve at WeekendWoodworking

View Dutchy's profile


1976 posts in 1591 days

#8 posted 10-25-2015 05:39 PM

Looks great.

-- My englisch is bad but how is your dutch?

View Hawaiilad's profile


2885 posts in 2443 days

#9 posted 10-25-2015 07:33 PM

Peter those look Great. You did a wonderful job on the RM

-- Larry in Hawaii,

View Mark Wilson's profile

Mark Wilson

1698 posts in 486 days

#10 posted 10-25-2015 09:24 PM

I don’t know what a Ringmaster is. And, Peter, I don’t know you. Yet. I found this on the DT3. It’s fantastic, mesmerizing, and very innovative. YAY. For this, I now Buddy Thee.

-- Mark

View Bob Collins's profile

Bob Collins

2263 posts in 3106 days

#11 posted 10-25-2015 11:12 PM

Another brilliant project Peter, you sure have that ringmaster working for you. Great looking wood and you have set it up beautifully. Like the idea of getting a smaller version, is it possible with the ringmaster to go even smaller, say 3 vases?

-- Bob C, Australia. I love sharing as long as it is not my tools

View deon's profile


2507 posts in 2448 days

#12 posted 10-26-2015 06:06 AM

Beautiful wood,looks great

-- Dreaming patterns

View luv2learn's profile


2409 posts in 1725 days

#13 posted 10-26-2015 04:20 PM

Pieces of art for sure.

-- Lee - Northern idaho~"If the women don't find you handsome, at least they ought to find you handy"~ Red Green

View MarkTheFiddler's profile


2053 posts in 1611 days

#14 posted 10-26-2015 09:46 PM

You certainly did justice to the canary wood. Beautiful work.

-- Thanks for all the lessons!

View turnkey47's profile


199 posts in 2114 days

#15 posted 10-27-2015 10:26 AM

great job on that vase!!!!

showing 1 through 15 of 18 comments

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics