|Project by rockmolsen||posted 10-18-2015 09:03 PM||1051 views||3 times favorited||5 comments|
I purchased 4 boards of this Kill Beetle Pine with the sole intent of making some band saw boxes so this is the first of probably 4 that I’ get from that purchase. While sanding the carcass with the back off, I actually broke it at the bottom of the second draw cavity just to the right of the knot. Well a little CA glue and a few minutes later we are back in business! The other goof on this was it was about 1/2 to tall even laying down to cut the back off on my band saw so I ended doing that on my table saw with actually very good success!
It stands 8”h x 6.5”w x 4”d. Sanded to 220 and with 2 coats of wipe on poly. Cool wood. If anyone has any other suggestions for the use please share, Thanks for looking.
-- Rick --------The measure of who we are is what we do with what we have.