|Project by ruizd||posted 10-13-2015 02:51 AM||464 views||0 times favorited||0 comments|
I made this two drawer night stand for my daughter’s room. It’s made from knotty pine for the case and face frame, 1/2” plywood drawers and ash for the drawer fronts. It’s about 24” height x 18” deep x 24” wide. I used 1×12 pine boards from home depot and cut out as many knots as I could for knot free look. I applied three coats of amber shellac for the finish and put a semi gloss lacquer top coat.
-- Dan - A good day in the wood shop is finishing up with all your fingers still attached!