LumberJocks

Cornholes!

  • Advertise with us
Project by Cornholesgalore posted 10-12-2015 02:50 PM 989 views 0 times favorited 7 comments Add to Favorites Watch

Here are some recent cornholes I have worked on/completed. I’m young to woodworking but joined this site to find some like-minded individuals, and to find some advice (I’m young to woodworking!)





7 comments so far

View phil7b7's profile

phil7b7

159 posts in 1281 days


#1 posted 10-12-2015 03:28 PM

Great looking boards, they are on my ever so long todo list. The finish with the decals turned out nice.

View chrisstef's profile

chrisstef

17387 posts in 3007 days


#2 posted 10-12-2015 03:51 PM

As a chiefs fan, I love that board, but be careful it may never score. Keep up the good work.

-- Its not a crack, its a casting imperfection.

View toddbeaulieu's profile

toddbeaulieu

814 posts in 3004 days


#3 posted 10-12-2015 07:51 PM

Welcome! This has to be the BEST site to learn from fellow woodworkers of all skills.

I built boards this summer for my MIL. Wish I had built a set for me. I used solid oak because I like to be different.

http://lumberjocks.com/projects/165426

View Cornholesgalore's profile

Cornholesgalore

11 posts in 961 days


#4 posted 10-12-2015 07:53 PM

Thanks for the compliments, I got a chuckle at the Chiefs comment, so did my buddies :D

View Pointer's profile

Pointer

427 posts in 1111 days


#5 posted 10-13-2015 02:15 AM

Great looking boxes. I may have to try a set of these some day.

-- Joe - - Don't be pessimistic, it never works works anyway.

View Cornholesgalore's profile

Cornholesgalore

11 posts in 961 days


#6 posted 10-13-2015 02:53 AM

Pointer,

Regulation size is 2ft wide by 4 ft long. I find its waist to get a 2 by 8 sheet or plywood and half it. Regulation height is 1 ft off the ground. I built a small rig to hold my cornholes up so I could measure the legs out. I would recommend cutting at least 20 inch legs, then you can angle them off at the appropriate height. I will attach a picture of the rig and how I do the legs. Also, a 6 inch diameter hole needs to be 6 inches from the top of the board.

View drbyte's profile

drbyte

796 posts in 4062 days


#7 posted 10-13-2015 12:39 PM

Great boards and even better paint scheme!!

-- Dennis, WV

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com