LumberJocks

4 in 1 Knock Down Workstation

  • Advertise with us
Project by Derek Oliver posted 10-11-2015 03:43 AM 1983 views 8 times favorited 8 comments Add to Favorites Watch

So I came across this in Shopnotes Magazine a while back and it has been on my to do list for too long. Well I can finally cross it off. I even made a video of the build if your interested: https://youtu.be/8oNZTY1kpbc
It’s made from a single sheet of plywood and a couple 2×4’s and can be made in a single weekend. Next I plan on making some accessories for it like some work surfaces, tool stands, and some work supports.





8 comments so far

View TopamaxSurvivor's profile

TopamaxSurvivor

17941 posts in 3312 days


#1 posted 10-11-2015 05:40 AM

Looks handy. Nice job of the video too.

-- Bob in WW ~ "some old things are lovely, warm still with life ... of the forgotten men who made them." - D.H. Lawrence

View bambam89's profile

bambam89

13 posts in 875 days


#2 posted 10-11-2015 06:11 PM

Nice job!!!
The yellow paint makes them look like their made of plastic.
Sure you didn’t buy them at lowes??? LOL

View helluvawreck's profile

helluvawreck

25882 posts in 2502 days


#3 posted 10-11-2015 06:20 PM

It looks like a good workable solution or a portable KD work support.

helluvawreck aka Charles
http://woodworkingexpo.wordpress.com

-- If a man does not keep pace with his companions, perhaps it is because he hears a different drummer. Let him step to the music which he hears, however measured or far away. Henry David Thoreau

View MT_Stringer's profile

MT_Stringer

3011 posts in 2867 days


#4 posted 10-11-2015 07:17 PM

Yours looks better than the one I made. Good job. I didn’t get good clean cuts where the pieces fit together. I had to beat them apart. I finally gave up and threw it away.

I do like the idea of it being two working heights. And it is fairly stable when put together.

-- Handcrafted by Mike Henderson - Channelview, Texas

View GerardoArg1's profile

GerardoArg1

951 posts in 1630 days


#5 posted 10-13-2015 11:29 AM

Great! Like the idea

-- Disfruta tu trabajo (enjoy your work) (Bandera, Argentina)

View DalyArcher's profile

DalyArcher

95 posts in 755 days


#6 posted 10-13-2015 04:59 PM

that is on my list for the coming weekend. Thought I would get it done this weekend, but no such luck. I need something to set my planer and router table on. May have to adjust the height a bit from the plans.

View MT_Stringer's profile

MT_Stringer

3011 posts in 2867 days


#7 posted 10-13-2015 05:43 PM



that is on my list for the coming weekend. Thought I would get it done this weekend, but no such luck. I need something to set my planer and router table on. May have to adjust the height a bit from the plans.

- DalyArcher

Just so you know, the legs can be set two ways – one for a lower height, and the other way for a higher working surface.

-- Handcrafted by Mike Henderson - Channelview, Texas

View Etch's profile

Etch

1 post in 530 days


#8 posted 03-12-2017 02:49 AM

Watched the video and would like to build. Do you have a copy of the plans? Cannot find this issue!

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com