|Project by BigCamGotTheWood||posted 10-07-2015 01:43 PM||596 views||2 times favorited||2 comments|
In this project we were told to makes cutting board out of different types of wood, and width. First I edge glued multiple different prices of wood. Then I ran it through the plainer until all the pieces were flush. After that I made an outline of a pig and cut it out with the bandsaw. I sanded the edges down with the belt sander and the spindle sander, then I sanded down the faces of the board. I then put on Butcher Block Conditioner on it so it will be protected. The wood I used on this piece was maple, cherry and walnut.
-- Big papi was here