KEHOE dovetail

  • Advertise with us
Project by Midway posted 10-02-2015 01:36 PM 1401 views 0 times favorited 7 comments Add to Favorites Watch
KEHOE dovetail
KEHOE dovetail No picture No picture No picture No picture No picture
Zoom Pictures

I built a jig to do the KEHOE dovetail on the corner. Not done by anyone else thatt i know of.

-- Midway wichita,ks.

7 comments so far

View wb8nbs's profile


164 posts in 2892 days

#1 posted 10-02-2015 02:26 PM

That’s really nice. Can you share how you did it?

-- The only difference between men and boys is the price of their toys.

View abie's profile


878 posts in 3971 days

#2 posted 10-02-2015 02:45 PM

Yes please show and tell..

-- Bruce. a mind is like a book it is only useful when open.

View MyHogany's profile


88 posts in 1637 days

#3 posted 10-02-2015 05:39 PM

Lovely box and very creative idea. I too look forward to seeing more about the jig; how you made it and how it works.

View Pointer's profile


434 posts in 1311 days

#4 posted 10-02-2015 09:43 PM

Wow, now that is a nice looking corner.

-- Joe - - There is no elevator to success. You must take the stairs.

View SASmith               's profile


1850 posts in 3187 days

#5 posted 10-02-2015 11:10 PM

Great idea.
I am a kehoe fan too.

-- Scott Smith, Southern Illinois

View  woodshaver Tony C   's profile

woodshaver Tony C

6223 posts in 3553 days

#6 posted 10-03-2015 12:22 AM

I think you have everyone’s attention. I have never seen anything like it before. Nicely done and good looking too!

-- St Augustine FL, Experience is the sum of our mistakes!

View Midway's profile


62 posts in 1169 days

#7 posted 10-05-2015 06:20 PM

Well i am puzzled about what to do.I was hoping Kehoe would still be in business and they could take this
simple design and sell it with the kit.I have sent pictures to rusty nail but haven’t been able to connect with
him yet. The jig (3 ea pieces of wood) wood be simple to make But the top guide plate will have to be made
on a bridgeport mill. I have made several guide plates But I used 1/2” for the basic slot width,and built all
my jigs. I don’t know what Kehoe used to base the slot width. I could make some guide plates but i would
need someone that has a kehoe jig and dial calipers so that i could make the slot in the guide plate match
your kehoe jig. I am not able to add pictures to this post.

-- Midway wichita,ks.

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics