|Project by Chris Davis||posted 07-02-2009 02:47 PM||2271 views||2 times favorited||2 comments|
This is a loft that was completed in March 2005. It is a twin size loft bed with the bed on the top only. The lower section is used as a play area. The two end panels were built in a four post design.
The arch on the end panel had a custom bent top molding. This molding was made by re-sawing boards down to about an 1/8” thick. 6 pieces were glued and clamped to a form. Once the glue dried it held it’s shaped and the could be trimmed and shaped.
-- Watch live video from our shop. http://www.wwbeds.com/#!current-projects/c3c1