|Project by AlBCuttnWud||posted 09-28-2015 01:28 PM||968 views||2 times favorited||10 comments|
This is a replica US Navy P-3 Orion prop. It measures roughly 28 inches tip to tip. Made with mahogany, cherry, maple, walnut, hickory and an unknown species for the nose cone. I started out with 1” stock for the prop blades and rough-shaped with a belt sander to get the pitch. I used a 3” lazy Susan spinner so it would rotate. Mounted up using a French cleat.
Clip on the link to see her rotate.
-- -Al, Chesapeake, VA