Wine Rack for wedding

  • Advertise with us
Project by Demowen posted 06-25-2009 03:16 PM 2955 views 7 times favorited 16 comments Add to Favorites Watch

This was a wedding gift for my brother’s wedding from my girlfriend and I. It is a cherry frame with ambrosia maple slats. You can read all about it in my tutorial. I’m always open for critique! Thanks!!

-- Let the favor of the Lord our God be on us; establish the work of our hands- establish the work of our hands! Psalm 90:17

16 comments so far

View lew's profile


12099 posts in 3777 days

#1 posted 06-25-2009 03:22 PM

Awesome Gift!

Your brother and his new wife must be very proud of this!


-- Lew- Time traveler. Purveyor of the Universe's finest custom rolling pins.

View Derrek LeRouax's profile

Derrek LeRouax

129 posts in 3316 days

#2 posted 06-25-2009 03:29 PM

WOW! What a great project. I like the extra detail of the grapes & vines. Great job.

-- Derrek L.

View CharlieM1958's profile


16275 posts in 4240 days

#3 posted 06-25-2009 03:33 PM

Nice job!

-- Charlie M. "Woodworking - patience = firewood"

View Jon3's profile


497 posts in 4127 days

#4 posted 06-25-2009 03:47 PM

Great looking rack! Well done on those grapes both to you and your girlfriend!

View Doug's profile


43 posts in 3330 days

#5 posted 06-25-2009 04:05 PM

Both of you did a great job, keep up the good work

-- Use your imagination ! you'll be suprised

View Rj's profile


1047 posts in 3653 days

#6 posted 06-25-2009 04:38 PM

Looks great! What a great wedding gift.

-- Rj's Woodworks,San Jose & Weed Ca,

View Bigdogs117's profile


1864 posts in 3643 days

#7 posted 06-25-2009 04:44 PM

Wow, That is nice. Lucky couple going to receive a nice gift.

-- Rusty

View BTKS's profile


1986 posts in 3486 days

#8 posted 06-25-2009 04:54 PM

Not just a gift but a family heirloom. Good Work, BTKS

-- "Man's ingenuity has outrun his intelligence" (Joseph Wood Krutch)

View CaptainSkully's profile


1600 posts in 3580 days

#9 posted 06-25-2009 06:43 PM

Very freaking nice! Craftsman furniture & wine; it doesn’t get much better than that. The initial was a nice touch. I may gank your design.

I’ve had good luck with a small diameter burr on my Dremel tool for custom ingraving. I print the graphic out on paper, spray adhesive it to the work, then sand it off with 80 grit.

-- You can't control the wind, but you can trim your sails

View RandyMarine's profile


236 posts in 3391 days

#10 posted 06-26-2009 04:20 AM

Great project….I wish I was your brother! I would love to have the skill you do. Looks like another 20 years of practice for me..LOL

-- Semper Fi, Randy Sr.

View a1Jim's profile


117114 posts in 3599 days

#11 posted 06-26-2009 04:22 AM

Fantastic work it looks great well done

-- wood crafting & woodworking classes

View Demowen's profile


121 posts in 3419 days

#12 posted 06-26-2009 04:59 AM

Thanks guys!! Really appreciate the comments!

-- Let the favor of the Lord our God be on us; establish the work of our hands- establish the work of our hands! Psalm 90:17

View Pheirendt's profile


32 posts in 4067 days

#13 posted 06-26-2009 06:45 AM

Great Job – I really like how you celebrated the Grape & the Vine on the wood top – you took my design to the next level!

-- Paul, St Louis, MO,

View Beginningwoodworker's profile


13345 posts in 3695 days

#14 posted 10-04-2009 09:01 PM

Nice gift!

View Varcuri's profile


6 posts in 2713 days

#15 posted 04-17-2013 05:29 PM

Did you cut the forstner holes first and rip the pieces into two wine bottle holders? If so, did you experience unacceptable blow-out in the holes? I’m building something similiar in red oak and I’m concerned about blow out if I take that approach.

showing 1 through 15 of 16 comments

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics