LumberJocks

Molbile Cart for My Tormek Sharpening System.

  • Advertise with us
Project by helluvawreck posted 09-21-2015 04:45 PM 2796 views 7 times favorited 24 comments Add to Favorites Watch

I have finally gotten around to making a mobile cart for my Tormek T7 Sharpening System. The cart has casters and five drawers. The cart is 23-1/2 inches wide 25 inches deep and 29-1/2 inches tall. I also have two other pedestal grinders and will probably mount each grinder on a plywood base so that I can easily change grinders. There is still plenty of room in the drawers to hold additional sharpening related accessories.

As usual it’s just a utility piece of shop furniture and other than being ample for the job there is nothing fancy about it. Thanks for looking.

helluvawreck aka Charles
http://woodworkingexpo.wordpress.com

-- If a man does not keep pace with his companions, perhaps it is because he hears a different drummer. Let him step to the music which he hears, however measured or far away. Henry David Thoreau





24 comments so far

View HillbillyShooter's profile

HillbillyShooter

5811 posts in 1757 days


#1 posted 09-21-2015 04:48 PM

Very nicely done, and looks like it will be a great addition and convenience for your shop.

-- John C. -- "Firearms are second only to the Constitution in importance; they are the peoples' liberty's teeth." George Washington

View CharlieM1958's profile

CharlieM1958

16242 posts in 3683 days


#2 posted 09-21-2015 04:49 PM

First-class shop furniture, Charles. You can never have too many drawers.

-- Charlie M. "Woodworking - patience = firewood"

View DocSavage45's profile

DocSavage45

7704 posts in 2307 days


#3 posted 09-21-2015 04:53 PM

Charles,

Thanks for posting and reminding me of my shop furniture to Do projects. LOL! it’s a clean, functional piece!

-- Cau Haus Designs, Thomas J. Tieffenbacher

View doubleDD's profile

doubleDD

5237 posts in 1508 days


#4 posted 09-21-2015 04:59 PM

Very nice sharpening cart. Almost a shame to use it. And best of all its on wheels.

-- Dave, Downers Grove, Il. -------- When you run out of ideas, start building your dreams.

View Siegs's profile

Siegs

50 posts in 517 days


#5 posted 09-21-2015 05:02 PM

Nicely done shop cart. I gotta make me a few of these.

View lew's profile

lew

11340 posts in 3220 days


#6 posted 09-21-2015 05:13 PM

You can never have too many drawers!

On my Tormek cart, I added a couple of measuring stops for jig setups. They’re nothing fancy- just some wooden pieces fastened to the top and set in from the face of the top at metric distances for my most used grinding jigs.

-- Lew- Time traveler. Purveyor of the Universe's finest custom rolling pins.

View drewpy's profile

drewpy

568 posts in 821 days


#7 posted 09-21-2015 05:19 PM

Looks great, Charles. I really like all the drawers. Clean and simple.

-- Drew in Ohio -- "The greatest wealth is health".

View Sodabowski's profile

Sodabowski

2308 posts in 2297 days


#8 posted 09-21-2015 05:53 PM

Nice setup Charles, I like the drawers a lot.

-- Thomas - Pondering the inclusion of woodworking into physics and chemistry classes...

View majuvla's profile

majuvla

9146 posts in 2332 days


#9 posted 09-21-2015 06:31 PM

Very well organized. Beautiful piece of drawer.

-- Ivan, Croatia, Wooddicted

View jtriggs's profile

jtriggs

142 posts in 3282 days


#10 posted 09-21-2015 06:48 PM

Charles, nice stand for your Tormek. I’ve got mine on a steel roll around cart.

One thing I have to deal with is water every where and my steel top helps with easy mop up. What is your top made of and is there any extra protection from water?

Good job.
Jon

-- Jon --Always remember, never live your life by a motto.

View Joe Lyddon's profile

Joe Lyddon

9443 posts in 3517 days


#11 posted 09-21-2015 07:19 PM

Nice job!

-- Have Fun! Joe Lyddon - Alta Loma, CA USA - Home: http://www.WoodworkStuff.net ... My Small Gallery: http://www.ncwoodworker.net/pp/showgallery.php?ppuser=1389&cat=500"

View helluvawreck's profile

helluvawreck

23175 posts in 2331 days


#12 posted 09-21-2015 07:39 PM

John, there will be sheet metal top with a lip on it under the grinder. It’s sort of like a pan that people would cook toast or a pizza on. Secondly, the cart will not be used much since it will be in one corner of the shop. It’s mostly to be able to roll the cart out several feet in order to sweep up around it. So it will be a stationary work platform for the most part.

helluvawreck aka Charles
http://woodworkingexpo.wordpress.com

-- If a man does not keep pace with his companions, perhaps it is because he hears a different drummer. Let him step to the music which he hears, however measured or far away. Henry David Thoreau

View jack1's profile

jack1

2057 posts in 3492 days


#13 posted 09-21-2015 09:09 PM

A very nice useful cabinet. Great work.

-- jack -- ...measure once, curse twice!

View JIMDAND's profile

JIMDAND

32 posts in 825 days


#14 posted 09-21-2015 11:19 PM

Nice job I might have to copy it for my tool sharpener . (lathe tools)

-- Wooden Creations

View jeff's profile

jeff

988 posts in 2929 days


#15 posted 09-21-2015 11:49 PM

Looks great.

-- Jeff,Tucson,Az.

showing 1 through 15 of 24 comments

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com