Mirror Frame

  • Advertise with us
Project by TMoney posted 09-15-2015 03:07 PM 612 views 0 times favorited 1 comment Add to Favorites Watch
Mirror Frame
Mirror Frame No picture No picture No picture No picture No picture
Zoom Pictures

I made this mirror frame by cutting the prices to 8 3/4 in and making a 45 degree cut. Then I carefully drilled holes into the back to connect all the pieces. Some issues I came across are the ingraver was down so I had to use a sticker process. Then next, I had to fix the angles to make all them fit together. If I were to do something different I would use a stain and probably sand the angles down better. Lastly, something I have learned was how to route a frame from the inside and also run the sticker machine!

-- T-Money

1 comment so far

View cabmaker's profile


1694 posts in 2718 days

#1 posted 09-15-2015 03:12 PM

That’s how we learn my friend !

If you learn from everything you do…...that means your on the right track !

Well done !

Enjoy the journey JB

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics