crownmolding box

  • Advertise with us
Project by prill369 posted 06-13-2009 07:12 PM 1622 views 2 times favorited 9 comments Add to Favorites Watch

lol the short story…I found a scrap piece of crownmolding, nuff said.

anyway, I cut the top of the crownmolding off to make the lid. I used the router table to cut a rabbit in the top and base then added oak strips to the base to form the lip for the lid. The purpleheart was the cut off from my argyle pattern box. Its got a lot of room for all my pendants, and future ones too.

Made of oak crown, walnut and purpleheart.

-- Prill369

9 comments so far

View CharlieM1958's profile


16274 posts in 4185 days

#1 posted 06-13-2009 07:29 PM


-- Charlie M. "Woodworking - patience = firewood"

View Kent Shepherd's profile

Kent Shepherd

2718 posts in 3253 days

#2 posted 06-13-2009 07:29 PM

Good idea. It looks nice.


View cabinetmaster's profile


10874 posts in 3525 days

#3 posted 06-13-2009 07:36 PM

WOW. That is nice looking box. Nice use of crown molding.

-- Jerry--A man can never have enough tools or clamps

View Don Newton's profile

Don Newton

714 posts in 3586 days

#4 posted 06-13-2009 09:27 PM

I have some crown mould scraps and was wondering what to do with them…......problem solved!

-- Don, Pittsburgh

View scrappy's profile


3506 posts in 3397 days

#5 posted 06-13-2009 10:40 PM

Great use of scraps. Have made a crown molding box myself but, it is in california and still haven’t gotten pics of it.

Keep it up.


-- Scrap Wood's the best...the projects are smaller, and so is the mess!

View Loucarb's profile


2388 posts in 3412 days

#6 posted 06-13-2009 11:53 PM

Fantastic looking box. Well done.

View a1Jim's profile


117063 posts in 3544 days

#7 posted 06-14-2009 05:17 AM

Very nice box fine woods well done.

-- wood crafting & woodworking classes

View renaissance_guy's profile


64 posts in 3527 days

#8 posted 06-14-2009 07:25 PM

Very inventive! Impressive.

-- Life is about experiences.

View SgtSnafu's profile


960 posts in 3238 days

#9 posted 06-18-2009 05:08 PM

Very good use of scrap molding !! Turned out very well…

-- Scotty - aka... SgtSnafu - Randleman NC

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics