LumberJocks

Double Barrelled Candy Dispenser- Bit of FUN.

  • Advertise with us
Project by BobWemm posted 09-01-2015 07:54 AM 1975 views 6 times favorited 14 comments Add to Favorites Watch

Following on from the recent M & M Dispenser posts, Rockbuster and Woodshaver and myself had a bit of fun and tossed a few ideas around until finally the “Challenge” was laid down.
“OK Smart arse, make one”, so here it is.
It is constructed from building pine, with the centre part dyed. There is a little problem in that the centre should have been a bit higher, asw access to the tray is a bit restricted by the dispensing handles.
Hope you enjoy this bit of fun.
Thanks for looking and C & C welcome.

Bob.

-- Bob, Western Australia, The Sun came up this morning, what a great start to the day. Now it's up to me to make it even better. I've cut this piece of wood 4 times and it's still too damn short.





14 comments so far

View Bob Collins's profile

Bob Collins

2320 posts in 3148 days


#1 posted 09-01-2015 08:06 AM

Does look like a fun project Bob, and a great result. Did the other complete one or did they leave it to the smart arse. Should be more of these challenges, brings out the best in some. Well done and good to see you left some M&M’s to see.

-- Bob C, Australia. I love sharing as long as it is not my tools

View BobWemm's profile

BobWemm

1810 posts in 1390 days


#2 posted 09-01-2015 08:36 AM

Bob, they left it me.

Bob.

-- Bob, Western Australia, The Sun came up this morning, what a great start to the day. Now it's up to me to make it even better. I've cut this piece of wood 4 times and it's still too damn short.

View Mark Wilson's profile

Mark Wilson

1752 posts in 527 days


#3 posted 09-01-2015 08:41 AM

Bob, and Bob, I think I have an idea for both of you. For you, Bob, the one with a penchant for making round things roll around, a marble machine. And for you, Bob, Who seem to enjoy making things that twist around on themselves, a marble machine.

California cheese is so good that we eat it. We don’t wear it on our heads.

-- Mark

View Bob Collins's profile

Bob Collins

2320 posts in 3148 days


#4 posted 09-01-2015 08:45 AM

They knew who had the talent to make one Bob, well done. Give me a clue please Mark, what is a marble machine? Is there one on the net? Found them, you must be joking Mark, even the plans have me bamboozled,
but will have to accept the challenge.

-- Bob C, Australia. I love sharing as long as it is not my tools

View Jim Jakosh's profile

Jim Jakosh

17163 posts in 2570 days


#5 posted 09-01-2015 12:00 PM

Cool one Bob!

-- Jim Jakosh.....Practical Wood Products...........Learn something new every day!! Variety is the Spice of Life!!

View doubleDD's profile (online now)

doubleDD

5232 posts in 1507 days


#6 posted 09-01-2015 01:17 PM

Double the fun Bob. I thought we were having M &M’s, plain and peanut. ha ha. What ever you put in there will be eaten. Nice job and glad you took the challenge.

-- Dave, Downers Grove, Il. -------- When you run out of ideas, start building your dreams.

View  woodshaver (Tony)  's profile

woodshaver (Tony)

4012 posts in 2817 days


#7 posted 09-01-2015 01:39 PM

You aced it Bob! Nice work! I’m sure your next one will be a bit higher for better access to the good stuff!

-- Tony C UAW, St Augustine FL, My high school shop teacher said "You can do it"... Now I can't stop!

View Todd Barrone's profile

Todd Barrone

799 posts in 1736 days


#8 posted 09-01-2015 01:59 PM

Neat idea.

-- "The Cedar King" https://www.facebook.com/BarroneFarm

View helluvawreck's profile

helluvawreck

23175 posts in 2331 days


#9 posted 09-01-2015 02:01 PM

Very creative and nice work.

helluvawreck aka Charles
http://woodworkingexpo.wordpress.com

-- If a man does not keep pace with his companions, perhaps it is because he hears a different drummer. Let him step to the music which he hears, however measured or far away. Henry David Thoreau

View Rockbuster's profile

Rockbuster

499 posts in 2072 days


#10 posted 09-01-2015 03:35 PM

Just goes to show you the one of us three that have the most time on their hands I’ll bet that both Tony and I agree on one thing, and that is that the Smart could be left off of the ?? I think that you should keep it short like it is Bob, the restriction will keep greedy fast hands from gobbling all of the goodies. You did a great job on this buddy, now Tony and I have to come up with another Challenge

-- Rockbuster,Ft. Wayne,In It is far better to remain silent, and appear the fool, than it is to open ones mouth, and remove all doubt.

View  woodshaver (Tony)  's profile

woodshaver (Tony)

4012 posts in 2817 days


#11 posted 09-01-2015 05:58 PM

Ok….I thought the candy machine was for the little ones so why would you need to get your big hands in there Bob? LOL!
Congratulation on you Daily Top Three Bob. You earned it buddy! As soon as the Florida heat is turned off I’ll be in the shop again giving your candy machine design a go!
Now stop eating all that candy Bob or you’ll get a belly ache.

-- Tony C UAW, St Augustine FL, My high school shop teacher said "You can do it"... Now I can't stop!

View kiefer's profile

kiefer

4881 posts in 2131 days


#12 posted 09-02-2015 01:00 AM

That does look like a fun challenge and project .
Now the two other guys have an advantage with the hard work of design already done .
I wonder if Tony and Rockbuster eat all the candy and are too embarrassed to show their empty ones .LOL
Have fun guys !

Klaus

-- Kiefer https://www.youtube.com/user/woodkiefer1/videos

View Rockbuster's profile

Rockbuster

499 posts in 2072 days


#13 posted 09-02-2015 03:49 AM

Hey Kiefer, when I first posted my 4 single ones that I made, all 4 of them had M&M’s in them, but ask everyone else, Bob’s was empty. I’d be willing to bet, that he steals the candy bags from all of the little “Trick or Treaters”

-- Rockbuster,Ft. Wayne,In It is far better to remain silent, and appear the fool, than it is to open ones mouth, and remove all doubt.

View Masseriawoodworks's profile

Masseriawoodworks

10 posts in 301 days


#14 posted 02-09-2016 10:04 PM

I like your idea have you thought about turning the bowl part?

-- Real men work with the wood

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com