LumberJocks

Single Board Wall Mounted Wine Rack

  • Advertise with us
Project by T8RB posted 08-28-2015 01:29 PM 1219 views 7 times favorited 6 comments Add to Favorites Watch

These are both made from 32” lengths of cedar 2×4 fence lumber. I used a 1 1/4” forstner bit for the bottle neck openings and rounded over all of the edges. The finish is a coat of salad bowl finish with a light cost of oil-based poly applied with hopes of sealing it. They have two keyhole hanging slots routed into the back of each rack.

The one shown on the wall is the one that I made for my wife. The second one was a commission after I posted a pic of ours on Instagram. The second one has a knot hole/void on the edge and I think it’s actually the better looking piece. I’m going to hate to see that one go.

-- "Man is a tool wielding animal."





6 comments so far

View calisdad's profile

calisdad

286 posts in 976 days


#1 posted 08-28-2015 11:55 PM

Cool. How do you keep a case of wine on the wall?

View T8RB's profile

T8RB

17 posts in 728 days


#2 posted 08-29-2015 02:51 PM

If you’re talking about the weight, we’ve had ours hanging on two 2 1/2” screws driven into a stud for about a month and a half and it has held up nicely, so far. I weighed our wine bottles and estimated around 40 pounds of total weight.

If you’re talking about keeping it stocked, it’s half full most of the time. :)

-- "Man is a tool wielding animal."

View Dave777's profile

Dave777

303 posts in 3535 days


#3 posted 08-30-2015 02:19 AM

Very nice , simple, well done
Dave

-- the stone rejected by the builders will become the capstone

View T8RB's profile

T8RB

17 posts in 728 days


#4 posted 08-31-2015 12:58 AM



Very nice , simple, well done
Dave

- Dave777

Thank you!

-- "Man is a tool wielding animal."

View InFoGiLy's profile

InFoGiLy

47 posts in 654 days


#5 posted 10-16-2015 10:50 PM

how did you attach it to the wall???

very nice too

View T8RB's profile

T8RB

17 posts in 728 days


#6 posted 10-17-2015 04:01 PM



how did you attach it to the wall???

very nice too

- InFoGiLy


Thank you!

I used a keyhole router bit in two places on the back and hung it on 2 1/2” screws mounted on the wall stud. It’s still holding nicely.

-- "Man is a tool wielding animal."

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com