Workshop accessories #2

  • Advertise with us
Project by majuvla posted 08-25-2015 04:10 PM 2157 views 7 times favorited 10 comments Add to Favorites Watch

Photo 1 : overlaping joint jig
Photo 2 : set up for picture frame mitered joint
Photo 3 : dado jig 90 degree set up, max. 60cm wide
Photo 4 : angled, up to 45 degree set up, max. 50cm wide
Photo 5 : tapering jig
Photo 6 : mitered box corner jig

-- Ivan, Croatia, Wooddicted

10 comments so far

View Roger's profile


19706 posts in 2222 days

#1 posted 08-25-2015 11:25 PM

All very nice, and All very handy to have in the shop. Good builds Ivan.

-- Roger from KY. Work/Play/Travel Safe. Keep your dust collector fed.

View Brett's profile


926 posts in 2177 days

#2 posted 08-26-2015 03:16 AM

Yeah, what Roger said! You have been busy. Take care Ivan.

-- Hand Crafted by Brett Peterson John 3:16

View BobWemm's profile


1724 posts in 1344 days

#3 posted 08-26-2015 05:56 AM

I like them, they will be very handy.
Thank you for sharing.


-- Bob, Western Australia, The Sun came up this morning, what a great start to the day. Now it's up to me to make it even better. I've cut this piece of wood 4 times and it's still too damn short.

View stefang's profile


15512 posts in 2752 days

#4 posted 08-26-2015 10:24 AM

Great work Ivan, they are all very useful jigs. A good addition to any shop.

-- Mike, an American living in Norway.

View BusterB's profile


1910 posts in 1426 days

#5 posted 08-26-2015 12:27 PM

Looks like you covered most of your shop table saw jig needs…well done sir.

-- Buster, Ocoee TN (Critics are men who watch a battle from a high place then come down and shoot the survivors - Hemingway)

View helluvawreck's profile


22669 posts in 2284 days

#6 posted 08-26-2015 12:29 PM

Ivan, this is a nice jig and a great addition to your shop.

helluvawreck aka Charles

-- If a man does not keep pace with his companions, perhaps it is because he hears a different drummer. Let him step to the music which he hears, however measured or far away. Henry David Thoreau

View Rockfoot's profile


28 posts in 457 days

#7 posted 08-26-2015 12:35 PM

Nice job. Typically I don’t build a jig until I need it. But so many times I just need to make one angled cut for instance and would be so quick with a taper jig. But I don’t want to stop what I’m doing and build a whole jig just for one cut. I should take a page from your book and just build one while I’m in between projects.

View majuvla's profile


8664 posts in 2285 days

#8 posted 08-27-2015 06:02 AM

Thanks all for comment (another daily top 3). Rockfoot, building such jigs is a funny and interesting itself, so it’s good to build it and have it even for one cut when you need it.

-- Ivan, Croatia, Wooddicted

View Jim Jakosh's profile

Jim Jakosh

16768 posts in 2523 days

#9 posted 08-27-2015 04:24 PM

WOW, Ivan, you have been busy. Very nice jigs for your shop. Now come all the projects using them!!

-- Jim Jakosh.....Practical Wood Products...........Learn something new every day!! Variety is the Spice of Life!!

View doubleDD's profile


5053 posts in 1461 days

#10 posted 08-27-2015 06:31 PM

If you don’t have room for all those nice jigs, you can send them to me. Great work.

-- Dave, Downers Grove, Il. -------- When you run out of ideas, start building your dreams.

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics