5 tablesaw jigs

  • Advertise with us
Project by Moosesman posted 08-20-2015 03:53 PM 4070 views 12 times favorited 3 comments Add to Favorites Watch

I got the plans for these from wood magazine. 5 tablesaw jigs from a half sheet of plywood. They also sell the hardware kit to make them which was pretty handy. Crosscut sled saddle fence tenon jig ripping sled dado/cutoff jig. This is an easy project and I think it will help me out a lot. I have been wanting to make some of these for my new tablesaw and this is very affordable. For less than 100 bucks you can make them all. Less than that if you have the wood in your shop already.

-- The reward of art is not fame or success but intoxication: that is why so many bad artists are unable to give it up. Jean Cocteau

3 comments so far

View Tugboater78's profile


2746 posts in 2215 days

#1 posted 08-20-2015 07:58 PM

Those will come in very useful!

Didnt realize the magazine sold the jig plans, nice to know.

Something i need to do for both my tablesaws, other things keep getting in the way of starting them though.

-- "....put that handsaw to work and make it earn its keep. - summerfi" <==< JuStiN >==>=->

View hoss12992's profile


4043 posts in 1916 days

#2 posted 08-21-2015 12:49 AM

Those will come in handy. Good job

-- The Old Rednek Workshop

View kimosawboy's profile


167 posts in 2994 days

#3 posted 08-21-2015 01:58 PM

While that sled might work OK for a few cuts, you might want to upgrade to one that uses both miter tracks on your saw and is a little safer. A crosscut sled that is dialed in properly is an added bonus to any shop.

G Vavra

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics