Off cut Spiral Cheese server.

  • Advertise with us
Project by degoose posted 06-01-2009 09:45 AM 2249 views 8 times favorited 17 comments Add to Favorites Watch

This is an off cut project, as these pieces were cut from the off cuts of the larger spiral Lazy Larry. Only 9 ” in diameter
No waste in my workshop..last pic is the dry fit prior to glue up and finish,

-- Don't drink and use power tools @

17 comments so far

View Vince's profile


1142 posts in 3330 days

#1 posted 06-01-2009 10:21 AM

Excellent…did you use a router and template to cut those out?
Very nice work

-- Vince

View degoose's profile


7227 posts in 3256 days

#2 posted 06-01-2009 10:23 AM

Band saw Vince

-- Don't drink and use power tools @

View ellen35's profile


2734 posts in 3334 days

#3 posted 06-01-2009 12:45 PM

Great work as usual. I’m planning to read your blog and get the hang of something like this.
I’d love to have you come to the LJ New England get together in Sept and bring the pizza…probably too far from Australia!

-- "Don't let the perfect be the enemy of the good." Voltaire

View degoose's profile


7227 posts in 3256 days

#4 posted 06-01-2009 12:48 PM

pizza is good but a little too far for me at this time.. would like to do a LJ road trip later.,.

-- Don't drink and use power tools @

View Splinterman's profile


23072 posts in 3262 days

#5 posted 06-01-2009 01:15 PM

The effect is outstanding and would look great set-up as a Lazy Susan.
What is the biggest diameter you could manage.

View darryl's profile


1795 posts in 4228 days

#6 posted 06-01-2009 01:24 PM

this looks really cool. it looks like a giant peppermint candy we have over here!

View DuaneEDMD's profile


115 posts in 3254 days

#7 posted 06-01-2009 01:31 PM

very cool Larry, does it mess with your vision if you spin it really fast???

-- --It's not how long you live, but how you live that makes it a life.--

View degoose's profile


7227 posts in 3256 days

#8 posted 06-01-2009 01:54 PM

S-man check my other post that one is a Lazy Larry and it is 500mm or 20” diameter
I can go over 700 nearly 30 ” with wide enough boards.

-- Don't drink and use power tools @

View bowyer's profile


340 posts in 3297 days

#9 posted 06-01-2009 02:00 PM

Another cool project!

-- If at first you don't succeed...Don't try skydiving

View patron's profile


13594 posts in 3242 days

#10 posted 06-01-2009 03:04 PM

now to put the chees board over the lazy larry upside down and spin them in opposite directions .
you can drink all the beer , while every one is hypmotized ! ( are getting sleepy …. you have drunk
enough …. you will wake up and remember what a wonderfull time you had …..

-- david - only thru kindness can this world be whole . If we don't succeed we run the risk of failure. Dan Quayle

View mtnwild's profile


3474 posts in 3428 days

#11 posted 06-01-2009 07:59 PM

Cool! You get some of these ides spinning and whole new worlds will be opening.



PS, I kind of like it before you cut it round. The shape look cool….......

-- mtnwild (Jack), It's not what you see, it's how you see it.

View Loucarb's profile


2388 posts in 3346 days

#12 posted 06-01-2009 11:42 PM

Great job. How do you clamp something like that?

View degoose's profile


7227 posts in 3256 days

#13 posted 06-02-2009 12:58 AM

With great difficulty let me tell you!!

-- Don't drink and use power tools @

View a1Jim's profile


116900 posts in 3478 days

#14 posted 06-02-2009 01:05 AM

Hey Larry
Another winner with off cuts at that. now for the 1/2” lazy larry with the off cuts from this one LOL

-- Custom furniture

View Beginningwoodworker's profile


13347 posts in 3574 days

#15 posted 06-02-2009 01:57 AM

Looks cool Larry.

showing 1 through 15 of 17 comments

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics