|Project by rockmolsen||posted 08-15-2015 06:24 PM||859 views||5 times favorited||1 comment|
I saw Mike Waldt do something similar on YouTube. They are made from left over scrap of cedar 4X4 from last weeks deck project. They are pretty easy to do. I set the height of my tool rest the same as the center of the top to find center. then move the tool rest to the edge where the holes are drilled, Used the lathe index to position all the holes (24). These are 6 & 7” tall, and about 3 1/4” diameter at the widest point. Sanded to 400 and finished with EEE and wax.
Thanks for the idea Mike and thanks for looking.
-- Rick --------The measure of who we are is what we do with what we have.