| Project by Rautenbach | posted 1458 days ago | 908 views | 1 time favorited | 4 comments |  |
 |
This one was made specifically for a shop owner she wanted a bookmark displayed on the top and then a rather long keyring holder and then space for shorter keyring holders where she wanted to display 2 sets of short ones that is why there are 4 dowels which are staggered the top one 6mm and the rest 16mm.I used kiaat wood and the stand is quite high due to the large keyring, the upright being 410mm high.But enough of stands now I must be boring you guys to death with all the stands.
-- Rautenbach,South Africa
| Pin It |
4 comments so far
scrappy
home | projects | blog
3474 posts in 1601 days
#1 posted 1458 days ago
Not boring. Inspireing!
These could be used for a dresser top jewelry stand also. Not just for a shop sales stand.
Keep it up and keep posting.
Great job.
Scrappy
-- Scrap Wood's the best...the projects are smaller, and so is the mess!
a1Jim
home | projects | blog
87268 posts in 1748 days
#2 posted 1458 days ago
Hey
I would like to see each and every of your stands , great job interesting design.
-- W James Brokenbourgh Custom furniture maker http://artisticwoodstudio.com/
Rautenbach
home | projects | blog
53 posts in 1471 days
#3 posted 1457 days ago
Thanx guys I appreciate it
-- Rautenbach,South Africa
Dusty56
home | projects | blog
10516 posts in 1859 days
#4 posted 1456 days ago
Perhaps some lighting or a camera flash would allow us to see your fine work even better : )
-- When did quiet and quite become the same word ? I'm guessing about the same time as your and you're did.
Have your say...