LumberJocks

Segmented turnings

  • Advertise with us
Project by Garwood posted 08-12-2015 02:15 AM 1004 views 0 times favorited 16 comments Add to Favorites Watch
Segmented turnings
Segmented turnings No picture No picture No picture No picture No picture
Zoom Pictures

Here are three of my latest segmented vessels. The one on the left is walnut with the top ring a mix of maple and pupleheart. The middle vessel is soft maple and bubinga and the third is cherry with the top ring of bubinga and two thin rings of maple Each ring is a 12 segment ring.

I don’t have the sizes handy but they are approximately 7 to 8 inches tall.

-- Gary





16 comments so far

View BobWemm's profile

BobWemm

2355 posts in 1764 days


#1 posted 08-12-2015 03:32 AM

Very interesting.
Segmenting sure is fun.
Thanks for sharing.
Bob

-- Bob, Western Australia, The Sun came up this morning, what a great start to the day. Now it's up to me to make it even better. I've cut this piece of wood 4 times and it's still too damn short.

View tomd's profile

tomd

2122 posts in 3608 days


#2 posted 08-12-2015 03:55 AM

All three look great, very nice work.

-- Tom D

View Ken90712's profile (online now)

Ken90712

17527 posts in 3027 days


#3 posted 08-12-2015 08:17 AM

Very nice job.

-- Ken, "Everyday above ground is a good day!"

View poospleasures's profile

poospleasures

636 posts in 2322 days


#4 posted 08-12-2015 12:10 PM

Very nice. You have a great talent. I to love to do segmenting. There are so many ways to shape the work. Keep up the great work and keep posting so we can “borrow” your ideas.

-- I,ve had amnesia for as long as I can remember. Vernon

View ChadRat6458's profile

ChadRat6458

84 posts in 1193 days


#5 posted 08-12-2015 12:32 PM

great job! How did you do the circles on the middle one?

-- WWW.SKYKAE.COM - Custome Wood Furniture and Signs WWW.FACEBOOK.COM/SkyKae.Kreations

View ZAGREB's profile

ZAGREB

766 posts in 1488 days


#6 posted 08-12-2015 07:48 PM

very,very nice…like chad i’d like to know how did you do the circles on the midle vessel

-- bambi

View JoeinGa's profile

JoeinGa

7724 posts in 1845 days


#7 posted 08-12-2015 10:19 PM

Beautiful! The one in the middle really stands out ~!

-- Perform A Random Act Of Kindness Today ... Pay It Forward

View peteg's profile

peteg

4193 posts in 2661 days


#8 posted 08-12-2015 10:28 PM

Lovely work Gary, that maple one sticks its neck above the pack to me :)
cheers
pete

-- Pete G: If you always do what you always did you'll always get what you always got

View Garwood's profile

Garwood

26 posts in 1782 days


#9 posted 08-13-2015 12:08 AM

First of all, thank you for the many nice compliments about my work. Some of you have asked how I did the feature ring on the maple vessel. Tomorrow I will take a photo of how a segment and show how its done. Its really very simple but a photo will help explain it.

-- Gary

View ChadRat6458's profile

ChadRat6458

84 posts in 1193 days


#10 posted 08-14-2015 12:37 PM

Did I miss the pictures?

-- WWW.SKYKAE.COM - Custome Wood Furniture and Signs WWW.FACEBOOK.COM/SkyKae.Kreations

View Garwood's profile

Garwood

26 posts in 1782 days


#11 posted 08-14-2015 12:50 PM

You haven’t missed them. It didn’t get them posted as I haven’t figured out how insert them in a comment. I will work on it this am.

Gary

-- Gary

View Garwood's profile

Garwood

26 posts in 1782 days


#12 posted 08-14-2015 02:48 PM

Here is a photo of 2 segments and the glue up of the stock I cut the segments from.the pattern of the ring will determine where it is in the vessel and how much curvature there is in the wall of the vessel. ie, more curvature, the more round the resulting figures will be. The size of the resulting figure will be determined by how much material is removed. When gluing the ring to the vessel, if you want the same size figures all around the vessel, it must be perfectly centered so you remove the same amount of wood from each segment as its turned. You can achieve an interesting pattern by gluing the ring off center. This will make the resulting figures different sizes around the ring.

I hope this helps and I’ve made the process clear. What is fun is gluing up different thickness of different colors, changing the curvature of the vessel etc. the variations are endless.

-- Gary

View Garwood's profile

Garwood

26 posts in 1782 days


#13 posted 08-14-2015 02:52 PM

I’m still having problems posting the photo. Will keep trying

-- Gary

View Garwood's profile

Garwood

26 posts in 1782 days


#14 posted 08-14-2015 02:57 PM

-- Gary

View helluvawreck's profile

helluvawreck

29192 posts in 2705 days


#15 posted 02-27-2017 11:03 PM

This is a very nice collection of turnings.

helluvawreck aka Charles
http://woodworkingexpo.wordpress.com

-- If a man does not keep pace with his companions, perhaps it is because he hears a different drummer. Let him step to the music which he hears, however measured or far away. Henry David Thoreau

showing 1 through 15 of 16 comments

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com