|Project by Jack Johnson||posted 08-10-2015 04:00 PM||601 views||0 times favorited||2 comments|
Here is a Wooden Chopping Board I made.
I cut the piece up using my band saw, then I planned them to the required thickness. After glueing them together I sanded the pieces flat using a belt sander. I used by router to round over the edges before sanding them to 220 grit. I then applied a food safe oil. I then screwed 4 rubber feet on to the bottom.
My Youtube – https://www.youtube.com/channel/UCkIexhYXbev8Qg77iV2IgOg
July Wrap Up (FEATURES THE CHOPPING BOARD) – https://youtu.be/x_8D9O6j6PE