LumberJocks

ENGAGEMENT GOBLET

  • Advertise with us
Project by Sam Shakouri posted 08-07-2015 10:19 AM 1261 views 0 times favorited 9 comments Add to Favorites Watch

A goblet with two trapped rings was my project for today. The purpose of the project is to test my own design ring cutter chisels. I opened the rings in the handle of two wrenches, and sharpened them to do the job of ring cutter chisel. One to cut from the right and the second one from the left, photos # 3 & 4. The result, as you see, was successful. I am still able to use both tools as wrenches. I’m excited about it.
In fact, I, successfully, cut three rings just in case I loos one. In the end I intentionally break one of them because I needed only two to call it engagement rings goblet.

-- Sam Shakouri / CREATING WONDERS WITH WOOD.....Sydney,Australia....





9 comments so far

View toyguy's profile

toyguy

1654 posts in 3860 days


#1 posted 08-07-2015 10:27 AM

good idea for a ring tool.

-- Brian, Ontario Canada,

View Bob Collins's profile

Bob Collins

2520 posts in 3706 days


#2 posted 08-07-2015 11:32 AM

Great idea with the wrenches Sam and a very nice engagement goblet. The rings look great.

-- Bob C, Australia. Your best teacher is your last mistake.

View helluvawreck's profile

helluvawreck

31351 posts in 2889 days


#3 posted 08-07-2015 01:19 PM

Sam that’s a nice piece of work and very creative with making those tools.

helluvawreck aka Charles
http://woodworkingexpo.wordpress.com

-- helluvawreck aka Charles, http://woodworkingexpo.wordpress.com

View Jim Jakosh's profile

Jim Jakosh

20589 posts in 3128 days


#4 posted 08-07-2015 01:48 PM

That is a great piece, Sam. Do you have a picture of the wrench and how you shaped it to do the cuts?

Jim

-- Jim Jakosh.....Practical Wood Products...........Learn something new every day!! Variety is the Spice of Life!!

View lew's profile

lew

12100 posts in 3778 days


#5 posted 08-07-2015 05:59 PM

Now that’s cool- Thanks for the idea, Sam!

-- Lew- Time traveler. Purveyor of the Universe's finest custom rolling pins.

View Schwieb's profile

Schwieb

1858 posts in 3484 days


#6 posted 08-07-2015 07:00 PM

Nice work Sam. I’m sure it will be a treasured memento for the couple.

-- Dr. Ken, Florida - Durch harte arbeit werden Träume wahr.

View ZAGREB's profile

ZAGREB

851 posts in 1673 days


#7 posted 08-07-2015 07:02 PM

very useful,thanks for idea
goblet is as usual…artistic

-- bambi

View JoeinGa's profile

JoeinGa

7736 posts in 2030 days


#8 posted 08-07-2015 10:14 PM

Neat trick using the wrenches. But couldn’t you just turn the wrench over to cut the opposite side?

Oh and the goblet is beautiful!

-- Perform A Random Act Of Kindness Today ... Pay It Forward

View Grumpy's profile

Grumpy

23997 posts in 3874 days


#9 posted 08-08-2015 01:12 AM

Sam, you are the man. Thats a great idea on the ring tools. Nice job on the Goblet.

-- Grumpy - "Always look on the bright side of life"- Monty Python

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com