Portable Spray Booth

  • Advertise with us
Project by Desert_Woodworker posted 08-04-2015 06:00 PM 1544 views 4 times favorited 3 comments Add to Favorites Watch

This idea comes from a forgotten web site vid. This is made from 4×8 foil insulation board. I used a ridged core and 1” thick. 3 pieces are laid on the ground; thin wood strips on the edges to add more stability, 3” Gorilla tape on the seams both sides. I left a gap (it will vary on your design) so it will fold up. 1 Piece for the top. The center has a removable filter in the front and another filter behind it. In the rear is the fan, and I used adhesive to seal it in. I have used this rig for 6 months and the filtration works great. The booth can be expanded with clear plastic and PVC- just use your creativity. The floor covering; many options but I am using a rolled construction paper and Gorilla taped. I also have a drop cloth to expand the floor are on bigger projects. Costs for 4 insulation boards, fan, adhesive and tape $100 – 120

-- Desert_Woodworker

3 comments so far

View kaerlighedsbamsen's profile


1199 posts in 1402 days

#1 posted 08-04-2015 08:44 PM

Neat solution!

-- "Do or Do not. There is no try." - Yoda

View Ken90712's profile


17391 posts in 2878 days

#2 posted 08-05-2015 08:30 AM


-- Ken, "Everyday above ground is a good day!"

View DonB's profile


509 posts in 2381 days

#3 posted 08-05-2015 10:41 AM

Very nice. I used the plastic sheet on PVC but it looks to be less rigid than your design. It serves the purpose well – which is the point. Thanks for sharing.

-- DonB

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics