| Project by daniel | posted 1662 days ago | 1124 views | 1 time favorited | 5 comments |  |
 |
I made a poster of my nephew Giovanni and sister Cathy last year so I decided to make a picture frame for it. Originally it was going to be made out of poplar but I cut the pieces too short so I added walnut on the ends. I used lap joints to connect the walnut to the poplar, and then I used pocket holes to connect the strips together.
| Pin It |
5 comments so far
woodshaver
home | projects | blog
2434 posts in 1720 days
#1 posted 1662 days ago
Looks Great! Creative people always find a way to make it work. May not be what you started out to build but we always seem to figure a way to make it work!
-- Tony C , My high school shop teacher said "You can do it"... Now I can't stop!
a1Jim
home | projects | blog
100851 posts in 1944 days
#2 posted 1661 days ago
creative fix should work fine
-- W James Brokenbourgh Custom furniture maker http://artisticwoodstudio.com/
SCOTSMAN
home | projects | blog
4531 posts in 1952 days
#3 posted 1661 days ago
looks strong enough to last a lifetime well done dont be afraid of mitres and practice with scrap if your not sure good luck Alistair
-- excuse my typing as I have a form of parkinsons disease
TraumaJacques
home | projects | blog
433 posts in 1868 days
#4 posted 1661 days ago
Good save nicely done.
-- All bleeding will eventually stop.
Splinterman
home | projects | blog
23055 posts in 1728 days
#5 posted 1661 days ago
Looks better than plain mitre joints.
Have your say...