LumberJocks

SQUIRREL FEEDER

  • Advertise with us
Project by ewinger posted 08-02-2015 09:58 PM 960 views 1 time favorited 2 comments Add to Favorites Watch
SQUIRREL FEEDER
SQUIRREL FEEDER No picture No picture No picture No picture No picture
Zoom Pictures

The squirrel feeder here is built from a wheel chair wheel that you use when you are moving around by your self. I then built two spokes from 5/4 deck board along with 4 – 10/24×6” machine bolts. this leaves about 4” sticking out for you to put the corn cobs on. I then used a piece of 1/2” copper pipe to act as a bearing for the 1/2” x 3” carriage bolt to spin on. I also used washers to space the wheel away from the post

-- Bill ewinger





2 comments so far

View Shuja's profile

Shuja

260 posts in 1026 days


#1 posted 08-26-2015 09:52 AM

I have not so far been able to coax the squirrels with various designs
I have to try this. It looks good
What is the this g hanging on the other side?

-- shuja

View ewinger's profile

ewinger

21 posts in 1517 days


#2 posted 08-27-2015 01:19 AM

this picture is wrong there miscommunication between my self and the original build of one. the reason I never could get it to spin because it was to tight. I found out today that you use the wheel of a wheel chair removing the outside ring so you have a bearing to make it spin unless you figure out how to put a bearing in the wood spoke like in this picture. it is to late tonight to take pictures and post but I will do it tomorrow. one thing about this one pictured here the squirrel would sit and eat. that is a bird feeder hang off the other side of the post

Bill Ewinger

-- Bill ewinger

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com